Analisa Penerapan Statistical Quality Control Dalam Mengurangi Produk Cacat Pada Kerupuk Udang
DOI:
https://doi.org/10.55606/jupiman.v2i3.2309Keywords:
Statistical Quality Control (SQC), Fishbone Diagrams, Pareto Diagrams, Control ChartsAbstract
A company is always looking for the minimum raw materials (price) and looking for the maximum gain (profit). Companies cannot stand alone, companies coexist through other components, one of which is a good level of production. Often there is a misalignment between the product made and the desired product. The purpose of writing this thesis is to see the level of a product, to apply a level control system, and to see the factors that cause defective products. This research was applied at the company PT Titani Alam Semesta, for 30 days from February 06 - March 06, 2023. This research utilizes the quota sampling method by randomly sampling a total of 1000 kilograms of export-type shrimp crackers within 1 hour and will later be processed by utilizing the P control map. The check sheet results show the number of defective cracker products totaling 300 kilograms of shrimp crackers, Central Line Analysis (CL) of 0.01, the calculation gain (UCL) of 0.019, and the calculation gain (LCL) of 0.001. Based on the research applied regarding the analysis of the application of Statistical Quality Control in minimizing the total defective products at the company PT. Titani Alam Semesta Gresik, a conclusion can be drawn that there is still a need for a good level of improvement so that the level of production can increase and can produce good products.
Downloads
References
Andini, P., & Puspitorini, R. (2023). Analisis Pengendalian Kualitas Menggunakan Metode Statistical Quality Control ( SQC ) pada Produk Kerupuk Singkong UD . Fatimah Jaya di Kabupaten Jember. 23(1), 22–26.
Andriani, D. N. (2017). Pengaruh modal, tenaga kerja, dan bahan baku terhadap hasil produksi (studi kasus pabrik sepatu PT. Kharisma Baru Indonesia). EQUILIBRIUM : Jurnal Ilmiah Ekonomi Dan Pembelajarannya, 5(2), 151. https://doi.org/10.25273/equilibrium.v5i2.1543
Apriyanti, M. E. (2018). Pentingnya Kemasan terhadap Penjualan Produk Perusahaan. Sosio E-Kons, 10(1), 20. https://doi.org/10.30998/sosioekons.v10i1.2223
Dasmasela, V. M., Morasa, J., & Rondonuwu, S. (2020). Penerapan Total Quality Management terhadap produk cacat pada PT. Sinar Pure Foods International di Bitung. Indonesia Accounting Journal, 2(2), 97. https://doi.org/10.32400/iaj.27796
Gaol, A. L., Hidayat, K., Administrasi, F. I., & Brawijaya, U. (2013). KONSUMEN DAN LOYALITAS KONSUMEN ( Survei pada Mahasiswa S1 Fakultas Ilmu Administrasi Tahun Akademik 2012 / 2013 Universitas Brawijaya yang Menggunakan Smartphone Samsung ). 38(1), 125–132.
Gupta, B. C. (2021). Statistical Quality Control: Using MINITAB, R, JMP and Python. John Wiley & Sons.
Herman, H., & Anhusadar, L. (2022). Pendidikan Islam Anak Suku Bajo: Penelitian Lapangan pada Suku Bajo. Jurnal Obsesi : Jurnal Pendidikan Anak Usia Dini, 6(4), 2665–2676. https://doi.org/10.31004/obsesi.v6i4.2266
Ishak, A., Siregar, K., Ginting, R., & Manik, A. (2020). Analysis Roofing Quality Control Using Statistical Quality Control (SQC) (Case Study: XYZ Company). IOP Conference Series: Materials Science and Engineering, 1003(1). https://doi.org/10.1088/1757-899X/1003/1/012085
Jonathan, J., & Machdar, N. M. (2018). PENGARUH KUALITAS LABA TERHADAP NILAI PERUSAHAAN DENGAN REAKSI PASAR SEBAGAI VARIABEL INTERVENING. Jurnal Riset Manajemen Dan Bisnis (JRMB) Fakultas Ekonomi UNIAT, 3(1), 67–76. https://doi.org/10.36226/jrmb.v3i1.87
Manta, P., Wahi, N., Bharadwaj, A., Kour, G., & Kapoor, D. N. (2021). A Statistical Quality Control (SQC) Methodology for Gold Nanoparticles Based Immune-chromatographic Rapid Test Kits Validation. Nanoscience & Nanotechnology-Asia, 11(6). https://doi.org/10.2174/2210681210666210108111055
Miati, I. (2020). Pengaruh Citra Merek (Brand Image) Terhadap Keputusan Pembelian Kerudung Deenay (Studi pada Konsumen Gea Fashion Banjar). Abiwara : Jurnal Vokasi Administrasi Bisnis, 1(2), 71–83. https://doi.org/10.31334/abiwara.v1i2.795
Muslih, M., & Mulyaningtyas, C. T. (2019). Pengaruh Corporate Governance, Kompetisi dan Karakteristik Perusahaan Terhadap Pengungkapan Risiko Perusahaan. Jurnal ASET (Akuntansi Riset), 11(1), 179–188. https://doi.org/10.17509/jaset.v11i1.17303
Pramudita, D. T., Gunawan, N. F., Ningsih, M. C., & Adilah, R. (2022). Determinasi Kepuasan Pelanggan dan Loyalitas Pelanggan: Harga dan Kualitas Produk. Jurnal Manajemen Pendidikan Dan Ilmu Sosial, 3(1), 424–436.
Ramarusad, V., Handayani, D., & Maryati, U. (2021). Analisa Pengaruh Kompetisi Pasar Produk, Ukuran Perusahaan, Leverage, Profitabilitas, Property, Plant And Equipment (PPE) dan Pertumbuhan Penjualan Terhadap Tax Avoidance Pada Perusahaan Manufaktur di Indonesia. Jurnal Akuntansi Keuangan Dan Bisnis, Vol. 14 No. 1 (2021), 75–84. https://doi.org/10.35143/jakb.v14i1.4583
Rangkuti, F. (2013). Customer Service Satiscaction & Call Centre Berdasarkan ISO 9001. Gramedia Pustaka Utama.
Ratnadi, R., & Suprianto, E. (2016). Pengendalian Kualitas Produksi Menggunakan Alat Bantu Statistik (Seven Tools) Dalam Upaya Menekan Tingkat Kerusakan Produk. Jurnal Indept, 6(2), 11. https://jurnal.unnur.ac.id/index.php/indept/article/view/178/0
Rochmawati, N., & Wardianto, M. (2020). Pengaruh Stress Kerja Terhadap Perilaku Produktif Ditinjau dari Pemberian Kompensasi yang Standar. Jurnal Psikologi : Jurnal Ilmiah Fakultas Psikologi Universitas Yudharta Pasuruan, 7(1), 56–71. https://doi.org/10.35891/jip.v7i1.1956
Sihombing, E. P., Sendow, G. M., & Uhing, Y. (2018). Pengaruh Karakteristik Individu Karakteristik Pekerjaan Dan Self Efficacy Terhadap Kinerja Karyawan Pada Pt . Pln ( Persero ) Rayon Manado Selatan The Infkuece Of Individua Characteristics, Job Characteristics, Self Efficacy And Employee Performance At. Jurnal EMBA: Jurnal Riset Ekonomi, Manajemen, Bisnis Dan Akuntansi, 6(4), 2858–2867.
Sugiyono. (2016). Metode Penelitian Kuantitatif, Kualitatif Dan R&D. Alfabeta.
Suhartini, N. (2020). PENERAPAN METODE STATISTICAL PROSES CONTROL (SPC) DALAM MENGIDENTIFIKASI FAKTOR PENYEBAB UTAMA KECACATAN PADA PROSES PRODUKSI PRODUK ABC. Jurnal Ilmiah Teknologi Dan Rekayasa, 25(1), 10–23. https://doi.org/10.35760/tr.2020.v25i1.2565
Zahrah, A., & Fawaid, A. (2019). Halal Food di Era Revolusi Industri 4.0: Prospek dan Tantangan. Hayula: Indonesian Journal of Multidisciplinary Islamic Studies, 3(2), 121–138. https://doi.org/10.21009/hayula.003.2.01