Pengembangan Jobsheet Berbasis Training Kit Smart Relay Multi Sensor Zelio SR2B201FU untuk Meningkatkan Hasil Belajar pada Mata Kuliah Otomasi Industri
DOI:
https://doi.org/10.55606/jtmei.v5i2.6222Keywords:
ADDIE, Industrial Automation, Jobsheet, Learning Outcomes, Smart Relay ZelioAbstract
This study aims to develop a learning medium in the form of a jobsheet based on the Smart Relay Multi-Sensor Zelio SR2B201FU training kit that is suitable for use in industrial automation practicum learning. The research employed a Research and Development (R&D) method using the ADDIE model. The results showed that the developed media had a very high level of validity, with a material validation score of 91.90% and a media validation score of 89.68%. In terms of practicality, the media received positive responses with a percentage of 89.14% and was categorized as very practical. In terms of effectiveness, the use of this learning media was able to improve students’ learning outcomes. This was indicated by the Paired Sample T-Test with a significance value of 0.000 (<0.05) and an N-Gain score of 0.58, which falls into the moderate category. In the psychomotor domain, students demonstrated very good ability in carrying out the practicum. Therefore, the jobsheet based on the Smart Relay Zelio SR2B201FU training kit is considered valid, practical, and effective for use in practicum learning.
Downloads
References
Akbar, J., Krismadinata, K., Ahyanuardi, A., & Asnil, A. (2021). Development of boost converter training kit as a practical tool in power electronics course. INVOTEK: Jurnal Inovasi Vokasional Dan Teknologi, 21(2), 95–104. https://doi.org/10.24036/invotek.v21i2.907
Arista, M., Salsa, N., & Shilvi, M. (2024). Media pembelajaran sebagai alternatif meningkatkan gairah belajar. Journal BIOnatural, 11(1), 76–83. https://ejournal.stkipbbm.ac.id/index.php/bio
Budi, I. P. K., Arsa, I. P. S., & ... (2021). Pembelajaran sistem kendali berbasis smart relay untuk mahasiswa program studi S1 Pendidikan Teknik Elektro Universitas Pendidikan Ganesha pada mata. Jurnal Pendidikan Teknik …, 10(3), 168–179. https://ejournal.undiksha.ac.id/index.php/JJPTE/article/view/37391
Dwi Agustin, A. P. D. M. R. N. (2025). Analisis media pembelajaran untuk meningkatkan minat belajar siswa melalui pembelajaran berbasis teknologi. Jurnal Multidisiplin Ilmu Akademik, 2(1), 397–408. https://doi.org/10.61722/jmia
Eliza, F., Candra, O., Mukhaiyar, R., Fadli, R., & Wibowo, Y. E. (2025). Development of a microcontroller training kit to increase student learning motivation. Engineering, Technology and Applied Science Research, 15(3), 22319–22326. https://doi.org/10.48084/etasr.10142
Hamdani, H., Jalinus, N., & Abdullah, R. (2024). Era baru pendidikan vokasi: Menuju Merdeka Belajar dan tantangan dunia kerja 4.0. Jurnal Ilmiah Pendidikan Teknik Dan Kejuruan, 17(2), 120. https://doi.org/10.20961/jiptek.v17i2.88904
Hammi, T., Hamid, M. A., & Permata, E. (2020). Pengembangan trainer instalasi motor listrik untuk meningkatkan hasil belajar siswa sekolah menengah kejuruan. TEKNO: Jurnal Teknologi …, 1–13. https://doi.org/http://journal2.um.ac.id/index.php/tekno
Jefri, A., & Sendari, S. (2020). Pengembangan modul dan trainer pengemas barang untuk pembelajaran FBD di Jurusan Teknik Elektro Universitas Negeri Malang. Jurnal FORTECH, 1(2), 53–60. https://doi.org/10.32492/fortech.v1i2.224
Kadek, I., Sanjaya, P., Putu, I., Arsa, S., & Santiyadnya, N. (2021). Pengembangan media pembelajaran trainer pengendalian motor listrik 3 phase berbasis smart relay Zelio pada mata pelajaran instalasi motor listrik di SMK Negeri 1 Susut. Jurnal Pendidikan Teknik Elektro Undiksha, 10(3), 142–155.
Kandia, I. W., Suarningsih, N. M., Wahdah, W., Arifin, A., Jenuri, J., & Suwarma, D. M. (2023). The strategic role of learning media in optimizing student learning outcomes. Journal of Education Research, 4(2), 508–514. https://doi.org/10.37985/jer.v4i2.193
McKenney, S., & Reeves, T. C. (2021). Educational design research: Portraying, conducting, and enhancing productive scholarship. Medical Education, 55(1), 82–92. https://doi.org/10.1111/medu.14280
Muktianto, O., Suprianto, B., Joko, J., & Wrahatnolo, T. (2022). Pengembangan jobsheet programmable logic controller pada mata pelajaran instalasi motor listrik untuk meningkatkan hasil belajar siswa kelas XII TITL di SMK Negeri 3 Surabaya. Jurnal Pendidikan Teknik Elektro, 11(02), 253–263. https://doi.org/10.26740/jpte.v11n02.p253-263
Nafiati, D. (2021). Revisi taksonomi Bloom: Kognitif, afektif, dan psikomotorik. Humanika, 151–172.
Oktageri, D., & Ahyanuardi. (2023). Efektivitas penerapan job sheet pembelajaran instalasi motor listrik di sekolah menengah kejuruan. 4(02), 279–284. http://jpte.ppj.unp.ac.id
Plomp, T., & Nieveen, N. (2013). Educational design research educational design research. Netherlands Institute for Curriculum Development: SLO. http://www.eric.ed.gov/ERICWebPortal/recordDetail?accno=EJ815766
Prihantoro, C. R., Titik Dwiyati, S., & Irgi Hakkul Hakim, M. (2025). Pengembangan media pembelajaran berbasis e-jobsheet pada mata pelajaran gambar teknik kelas X di SMKS. 13(1), 30–37. https://doi.org/http://10.0.93.79/jptm.v13i1.91761
Samsuri, T., Widiana, I. W., Lasmawan, I. W., & Suharta, I. G. P. (2025). Transforming higher education curriculum based on the Indonesian National Qualifications Framework (KKNI) to address human resource challenges in the Industrial Revolution 4.0 era. Path of Science, 11(6), 2009. https://doi.org/10.22178/pos.119-11
Sari, A. P., Hasanah, S., & Nursalman, M. (2024). Uji normalitas dan homogenitas dalam analisis statistik. Pendidikan Tambusai, 8(2012), 51329–51337.
UNESCO. (2024). Higher education: Figures at a glance. UNESCO Digital Library. https://unesdoc.unesco.org/ark:/48223/pf0000389069
Undang-Undang Republik Indonesia Nomor 12 Tahun 2012 tentang Pendidikan Tinggi.
Wafiq Azizah, & Wahyu Dwi Kurniawan. (2023). Pengembangan media pembelajaran trainer kontrol relay untuk menunjang mata kuliah instrumentasi dan kendali program studi S1.
Yanto, D. T. P., Candra, O., Dewi, C., & ... (2022). Electric drive training kit sebagai produk inovasi media pembelajaran praktikum mahasiswa pendidikan vokasi: Analisis uji praktikalitas. JINoP (Jurnal Inovasi …), 8(1), 106–120. https://ejournal.umm.ac.id/index.php/jinop/article/view/19676
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Pipit Marshanda, Fendi Achmad, Yulia Fransisca, Ali Nur Fathoni
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
