Analisis Casing Wear Ring Load Cycle Fatigue pada Sistem Kerja Pompa Sentrifugal ETA-N 100x80-200 di Bengkel Mekanik PEM Akamigas
DOI:
https://doi.org/10.55606/jtmei.v3i4.4465Keywords:
Casing Wear Ring Load Cyle Fatigue, ETA-N Centrifugal Pump, Pump Working SystemAbstract
The aim of this research is to analyze casing wear ring load cycle fatigue on the working system of eta-n 100x80-200 centrifugal pump at the akamigas mechanical workshop. This research method uses the step method. Simulation results using ANSYS 2024 software , obtained wear ring wear deformation of 0.378885 mm (average) and 0.3762455 mm (maximum) with wear ring clearance 0.38 mm. The comparison results of wear ring wear are less than the maximum wear ring tolerance, and wear ring wear is more than the minimum wear ring tolerance, so the results obtained still meet the tolerance standards. Simulation results of wear rings that are given 2x loading from the initial load
Downloads
References
ASM Handbook Committee, ASM Handbook, vol. 1. Materials Park, OH: ASM International, 2002.
Dewi, Nina. 2019. Pengaruh Kemudahan, Keamanan Dan Pengalaman Pembelian Terhadap Keputusan Pembeliansecara Onlinemenggunakan Aplikasi Shopee (Studi Kasus Mahasiswa Fakultas Ekonomi Universitas Maarif Hasyim Latif Sidoarjo). Jurnal Ilmu Ekonomi Manajemen dan Akuntansi. Vol.8, No.(1), 25-32.
E. Pujiyulianto, A. Muhyi, F. Paundra, F. Perdana, H. Yudistira, and M. Syaukani, "Failure Analysis of a Wear Ring Impeller," Engineering Failure Analysis, vol. 138, p. 106415, 2022, doi: 10.1016/j.engfailanal.2022.106415.Ariyanto, Aris, A. Nuryani dan D. Sunarsi. 2020. “Pengaruh Store Atmosphere dan Promosi Terhadap Keputusan Pembelian Pada Alfamart BSD Tangerang Selatan”. Jurnal Ekonomi Efektif . Vol. 3, No. 1.
Fahmi, Alfino Rifqi. (2016). Analisis Fatigue Life Sambungan Kritis Pada Platform Attaka B Dengan Retak Semielliptical Menggunakan Linear Elastic Fracture Mechanics (LEFM). Surabaya: Institut Teknologi Sepuluh Nopember.
I. J. Karassik, Pump Handbook, 4rd Edition. New York: McGraw-Hill, 2008.
S. Supari, Perawatan Mekanik. Jakarta: Gramedia, 2012.
T. Ambler and Barry N. taylor, NST Special publication 881: 2008 Edition
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Jurnal Teknik Mesin, Industri, Elektro dan Informatika
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
