Pengukuran Kinerja Mesin Sewage Treatment Plant (STP) menggunakan Metode Overall Equipment Efeectiveness

(Studi Kasus Pada PT. Gaia Care International)

Authors

  • Sofyan Wahyu Universitas Bina Sarana Informatika
  • Nova Pangastuti Universitas Bina Sarana Informatika
  • Sepriadi Paningotan Universitas Bina Sarana Informatika

DOI:

https://doi.org/10.55606/jtmei.v3i3.4118

Keywords:

OEE, Rework losses, Fish Bone

Abstract

One of the important things in supporting the operational management of the building which is part of the building's mechanical and electrical aspects is the building's domestic liquid waste management system. The availability of liquid waste production cannot be separated from the performance of the Sewage Treatment Plan (STP) machine as a work tool that produces domestic liquid waste production in HDI Hive Menteng Building. STP machine maintenance is one of the important factors in ensuring the quality of liquid waste production in accordance with the Environmental Service (DLH) quality standards. The machine maintenance system can be used as a benchmark for measuring the effectiveness of STP machines. Machine performance with a high rhythm without stopping 24 hours which continues to increase and is comparable to the tenant accoupancy level, of course requires anticipatory action for machine breakdown problems. Overall Equipment Effectiveness (OEE) is a method used to measure and maximize machine effectiveness based on three categories, namely Availability rate, Performance rate, Quality rate. From the results of calculating the OEE value for the STP machine at PT. Gaia Care International) of 82.96%, in general the OEE value is still below the JIPM standard value, namely greater than 85%. For this reason, in this research, an analysis was carried out using a fishbone diagram, which is used to determine the causes and effects of not achieving the effectiveness of the STP machine. Based on the results of the Fish Bone Diagram analysis with several factors including; Machines, methods, people and materials can be concluded as factors that cause a decrease in the OEE value of STP machines, namely rework losses which are quite high so that they affect the Quality OEE value in STP machine measurements. The proposal given to increase the effectiveness of the STP Machine for controlling Rework Losses is to improve the general cleaning routine and increase the Backwash Pump Capacity in the aeration tank and Inlet.

Downloads

Download data is not yet available.

References

Amaruddin, H. (2020). Analisis Analisis Penerapan Total Productive Maintenance. EKOMABIS: Jurnal Ekonomi Manajemen Bisnis, 1(02), 141–148. https://doi.org/10.37366/ekomabis.v1i02.46

Andri, & Marikena, N. (2023). Total Productive Maintenance (TPM) Pada Perawatan Mesin Grinding Menggunakan Metode Overall Equipment Effectiveness (OEE) Di PT. Amin Jaya Teknik. Jurnal JTTI (Jurnal Teknik Dan Industri}, 1, 118–130.

Anrinda, M., Sianto, M. E., & Mulyana, Ig. J. (2021). ANALISIS PERHITUNGAN OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA MESIN OFFSET CD6 DI INDUSTRI OFFSET PRINTING. Prosiding Seminar Nasional Riset Dan Teknologi Terapan (RITEKTRA).

Beno, J., Silen, A. P., & Yanti, M. (2022). DAMPAK PANDEMI COVID-19 PADA KEGIATAN EKSPOR IMPOR (STUDI PADA PT. PELABUHAN INDONESIA II (PESERO) CABANG TELUK BAYUR). JURNAL SAINS DAN TEKNOLOGI MARITIM, 22(2), 117. https://doi.org/10.33556/jstm.v22i2.314

Febi Kurnia Sari, C., & Supardi. (2022). PARETO DIAGRAMS STUDY OF GROSS REGIONAL DOMESTIC PRODUCT EXPOSURE IN CERTAIN SECTORS IN A REGION. JURUTERA - Jurnal Umum Teknik Terapan, 9(02), 23–27. https://doi.org/10.55377/jurutera.v9i02.6643

Hidayat, H., Jufriyanto, Moh., & Rizqi, A. W. (2020). ANALISIS OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA MESIN CNC CUTTING. ROTOR, 13(2), 61. https://doi.org/10.19184/rotor.v13i2.20674

Hussein, M. (2021). ANALISIS KUALITAS AIR SUNGAI AKIBAT PEMBUANGAN LIMBAH PERBAIKAN KAPAL DI SEKITAR PT.DOK DAN PERKAPALAN KODJA BAHARI (PERSERO) SHIPYARD BANJARMASIN 2021. Universitas Islam Kalimantan Muhammad Arsyad Al Banjari Banjarmasin.

Kurniawan, A., Andesta, D., & Ismiyah, E. (2022). ANALISIS EFEKTIVITAS MESIN PENGOLAHAN MINYAK DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS DAN FAILURE MODE EFFECT ANALYST PADA PT. WILMAR NABATI INDONESIA. JUSTI (Jurnal Sistem Dan Teknik Industri), 3(1), 62. https://doi.org/10.30587/justicb.v3i1.4414

Laia, E. (2023). ANALISIS STRUKTUR TEKS LAPORAN OBSERVASI SISWA KELAS X SMA NEGERI 2 SUSUA TAHUN PELAJARAN 2021/2022. KOHESI : Jurnal Pendidikan Bahasa Dan Sastra Indonesia, 3(2), 13–23. https://doi.org/10.57094/kohesi.v3i2.848

Muhammad, F. (2021). Application of The Overall Equipment Effectiveness (OEE) Method in Increasing The Efficiency Of Mangel / Crepper Machine. Journal of Engineering Science and Technology Management (JES-TM), 1(1), 13–21. https://doi.org/10.31004/jestm.v1i1.10

Nabila, T. F., & Mirwan, M. (2023). Pengawasan Dinas Lingkungan Hidup Provinsi Jawa Timur Terhadap Limbah Cair Industri Baja dan Pengolahannya. INSOLOGI: Jurnal Sains Dan Teknologi, 2(3), 535–542. https://doi.org/10.55123/insologi.v2i3.1922

Nawassyarif, M. Julkarnain, & Rizki Ananda, K. (2020). SISTEM INFORMASI PENGOLAHAN DATA TERNAK UNIT PELAKSANA TEKNIS PRODUKSI DAN KESEHATAN HEWAN BERBASIS WEB. Jurnal Informatika, Teknologi Dan Sains, 2(1), 32–39. https://doi.org/10.51401/jinteks.v2i1.556

Nurdin, F. F. (2023). Peningkatan Produktivitas Peralatan dan Perawatan Mesin Total Productive Maintenance (TPM) menggunakan metodeOverall Equipment Effectiveness (OEE). Prosiding SAINTEK: Sains Dan Teknologi, 2(1), 388–399.

Oktaviana, A. C., & Auliandri, T. A. (2023). Analisis Pengendalian Kualitas Produksi Meja Dan Kursi Menggunakan Diagram Pareto Dan Fishbone Pada PK. SKM JATI. INOBIS: Jurnal Inovasi Bisnis Dan Manajemen Indonesia, 6(4), 559–572. https://doi.org/10.31842/jurnalinobis.v6i4.310

Pangastuti, N. (2021). PENGUKURAN EFEKTIVITAS MESIN TRAFO DENGAN MENGGUNAKAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA PT PLN (PERSERO) AREA BINTARO. IMTechno: Journal of Industrial Management and Technology, 2.

Priyono, S., Machfud, M., & Maulana, A. (2019). Penerapan Total Productive Maintenance (TPM) Pada Pabrik Gula Rafinasi di Indonesia (Studi Kasus: PT. XYZ). Jurnal Aplikasi Bisnis Dan Manajemen, 5(2), 265–277. https://doi.org/10.17358/jabm.5.2.265

Purnomo, J., Affandi, N., & Rahmatullah, A. (2021). ANALISIS PENERAPAN PERAWATAN MOTOR KONVEYOR MESIN XRAY DENGAN MENGGUNAKAN METODE RELIABILITY CENTERED MAINTENANCE (RCM) PADA PT. TRISTAN ENGINEERING. Jurnal Ilmiah Teknik Dan Manajemen Industri, 1(1), 78–93. https://doi.org/10.46306/tgc.v1i1.7

Rampengan, M., Nangoi, G. B., & Manssoh, H. (2016). ANALISIS EFEKTIFITAS DAN EFISIENSI PELAKSANAAN ANGGARAN BELANJA BADAN PERENCANAAN PEMBANGUNAN DAERAH (BAPPEDA) KOTA MANADO. Jurnal Berkala Ilmiah Efisiensi, 16(3), 616–623.

Rifa’i, Y. (2023). Analisis Metodologi Penelitian Kulitatif dalam Pengumpulan Data di Penelitian Ilmiah pada Penyusunan Mini Riset. Cendekia Inovatif Dan Berbudaya, 1(1), 31–37. https://doi.org/10.59996/cendib.v1i1.155

Ruslan, M., & Prasmoro, A. V. (2020). Analisis Penerapan Total Productive Maintenance (TPM) dengan Metode Overall Equipment Effectiveness (OEE) pada Mesin Kneader (Studi Kasus PT. XYZ). Journal of Industrial and Engineering System (JIES), 1(1), 53–64.

Saharudin, Afriza, & Andriani, T. (2023). Struktur Organisasi Lembaga Pendidikan. Jurnal Pendidikan Tambusai, 7(1), 310–113.

Said, N. I. (2000). Teknologi Pengolahan Air Limbah Dengan Proses Biofilm Tercelup. Jurnal Teknologi Lingkungan, 1(2), 101–113.

Sibarani, A. A., Muhammad, K., & Yanti, A. (2020). Analisis Total Productive Maintenance Mesin Wrapping Line 4 Menggunkan Overall Equipment Effectiveness dan Six Big Losses di PT XY, Cirebon - Jawa Barat. Jurnal Rekayasa Sistem & Industri (JRSI), 82. https://doi.org/10.25124/jrsi.v7i2.425

StatSoft, Inc. (1997). Electronic Statistic Textbook. Tulsa OK., StatSoft Online. Available at: http://www.statsoft.com/textbook/stathome.html, diakses tanggal 27 Mei 2000.

Sulistia, S., & Septisya, A. C. (2020). ANALISIS KUALITAS AIR LIMBAH DOMESTIK PERKANTORAN. Jurnal Rekayasa Lingkungan, 12(1), 41–57. https://doi.org/10.29122/jrl.v12i1.3658

Taufik, F. M., Puri, G. N., Meidina, M., & Zaidan, R. M. (2023). ANALISA PENGUKURAN EFEKTIVITAS MESIN PADA PROSES FILLING MENGGUNAKAN METODE OVERALL EQUIPMENT EFECTIVENESS (OEE) & SIX BIG LOSSES DI PT SANBE FARMA BANDUNG. Jurnal Bayesian: Jurnal Ilmiah Statistika Dan Ekonometrika, 3(1), 28–37.

Wahid, A. (2020). Penerapan Total Productive Maintenance (TPM) Produksi Dengan Metode Overall Equipment Effectiveness (OEE) Pada Proses Produksi Botol (PT. XY Pandaan – Pasuruan). JURNAL TEKNOLOGI DAN MANAJEMEN INDUSTRI, 6(1), 12–16. https://doi.org/10.36040/jtmi.v6i1.2624

Zlatić, M. (2019). TPM - TOTAL PRODUCTIVE MAINTENANCE. Proceedings on Engineering Sciences, 1, 581–590. https://doi.org/10.24874/PES01.02.057

Downloads

Published

2024-07-31

How to Cite

Sofyan Wahyu, Nova Pangastuti, & Sepriadi Paningotan. (2024). Pengukuran Kinerja Mesin Sewage Treatment Plant (STP) menggunakan Metode Overall Equipment Efeectiveness : (Studi Kasus Pada PT. Gaia Care International). Jurnal Teknik Mesin, Industri, Elektro Dan Informatika, 3(3), 46–63. https://doi.org/10.55606/jtmei.v3i3.4118

Issue

Vol. 3 No. 3 (2024): September : JURNAL TEKNIK MESIN, INDUSTRI, ELEKTRO DAN INFORMATIKA

Section

Articles

License

Copyright (c) 2024 Jurnal Teknik Mesin, Industri, Elektro dan Informatika

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.