Prototype Pendeteksi Beban Berlebih Untuk Keamanan Operasi Hydraulic Crane Di Kapal Penumpang

Authors

  • Ivana Wika Aprilia Politeknik Pelayaran Surabaya
  • Antonius Edy Kristiyono Politeknik Pelayaran Surabaya
  • Teguh Pribadi Politeknik Pelayaran Surabaya
  • Sonhaji Sonhaji Politeknik Pelayaran Surabaya
  • Wulan Marlia Sandi Politeknik Pelayaran Surabaya

DOI:

https://doi.org/10.55606/jtmei.v3i3.4082

Keywords:

Esp32, Loadcell, HX711, Joystick, Crane

Abstract

The safety and protection of the hydraulic crane is an important aspect that ensures the charging operation runs safely and efficiently, this study aims to provide protection against crane damage and minimize work accidents by providing overload detection sensors using loadcells and hx711 as the primary sensor in charging this device.  This tool is a miniature crane that uses a servo motor and a DC motor as a replacement for the hydraulic on the crane.  Where the same function, to move the arm of the crane and crane can rotate left, right, and up.  The researchers used prototype methods to build and develop prototypes of cranes.  To monitor this control system, use ESP32 as the transmitter and receiver of the joystick motion response.  The received data will be processed and displayed on the LCD. Testing this device can detect how much load is lifted and detect if the load is over lifted, the device's operating system will lower the load again if overloaded.

 

 

Downloads

Download data is not yet available.

References

Academy, B. (2023). Prototype : Pengertian, Tujuan, dan Manfaatnya. Retrieved December 10, 2023, from https://www.binaracademy.com/blog/pengertian-prototype-dan-tujuannya

AJI, I. P. (2023). Analisis Pelaksanaan Uji Beban Crane Terhadap Kelancaran Proses Bongkar Muat Batu Bara Di Mv Habco Polaris. Politeknik Ilmu Pelayaran Semarang.

Argyanti, Z. (2022). Analisis Sistem Pengendali Kapasitas Beban Muatan Truk Berbasis Teknologi Internet. Ocean Engineering: Jurnal Ilmu Teknik Dan Teknologi Maritim, 1(3), 74–84. Retrieved December 10, 2023, from the journal website.

Bado, B. (2022). Model Pendekatan Kualitatif: Telaah Dalam Metode Penelitian Ilmiah (Cet. 1). Tahta Media Grup.

Component 101. (2021). MT3608 - 2A DC-DC Step Up (Boost) Power Module. Retrieved April 12, 2024, from https://components101.com/modules/mt3608-2a-dc-dc-step-up-power-module

Effendi, R., Ali, S., & Usmardi, U. (2020). Kendali Senapan Menggunakan Joystick Berbasis Mikrokontroller ATmega32 Dengan Modul NRF24L01. Jurnal Litek: Jurnal Listrik Telekomunikasi Elektronika, 17(2), 61–68.

Fatoni, A., Nugroho, D. D., & Irawan, A. (2015). Rancang bangun alat pembelajaran microcontroller berbasis atmega 328 di universitas serang raya. PROSISKO: Jurnal Pengembangan Riset Dan Observasi Sistem Komputer, 2(1).

Fitria, Y. (2018). Prototipe Sistem Buka Tutup Bascule Bridge Otomatis Untuk Perlintasan Kapal Berbasis Arduino Mega. Retrieved December 10, 2023.

Ishaq, I., Azhar, A., & Muhaimin, M. (2019). Rancang Bangun Neraca Elektronik Menggunakan Sensor Load Cell Pada Mesin Penggiling Kunyit Kering. Jurnal TEKTRO, 3(1). Retrieved December 10, 2023.

Mardani, R., & Melda, A. (2023). Sistem Informasi Manajemen Prestasi Mahasiswa Pada Prodi Sistem Informasi Berbasis Web [institut informatika dan bisnis]. Retrieved November 8, 2023, from http://repo.darmajaya.ac.id/14328/

Nizam, M. N., Yuana, H., & Wulansari, Z. (2022). Mikrokontroler Esp 32 Sebagai Alat Monitoring Pintu Berbasis Web. JATI (Jurnal Mahasiswa Teknik Informatika), 6(2), 767–772. Retrieved December 10, 2023.

PT. Karya Setia Jaya. (2023). Hidrolik Crane: Pengertian, Jenis-Jenis dan Fungsinya. Retrieved from https://ksj.co.id/hidrolik-crane-pengertian-jenis-jenis-dan-fungsinya/

Ramadhan, M. F. (2022). Alat Penghitung Otomatis Keluar Dan Masuknya Barang Beserta Peringatan Jika Melebihi Maksimal Penyimpanannya. Journal of Syntax Literate, 7(7). Retrieved May 15, 2024.

Randi, B. S. (2018). Teori Penelitian Terdahulu. Erlangga.

Robinson, R., Zulnasri, Z., Effendi, E., & Sihotang, W. S. (2020). Analisis Kerusakan Deck Crane Pada Saat Proses Bongkar Muat di Kapal MV. Ch Bella.

Rohim, M. Z., Wijayanti, E., & Murti, A. C. (2021). Design of overloading detection systems on vehicles using arduino. Journal of Physics: Conference Series, 1943(1), 12022. Retrieved May 15, 2024.

Sutarti, T., & Irawan, E. (2017). Kiat sukses meraih hibah penelitian pengembangan. Deepublish. Retrieved May 15, 2024.

Wagyana, A. (2019). Prototipe Modul Praktik untuk Pengembangan Aplikasi Internet of Things (IoT). Setrum: Sistem Kendali-Tenaga-Elektronika-Telekomunikasi-Komputer, 8(2), 238–247. https://doi.org/https://doi.org/10.36055/setrum.v8i2.6561. Retrieved December 17, 2023.

Downloads

Published

2024-07-24

How to Cite

Ivana Wika Aprilia, Antonius Edy Kristiyono, Teguh Pribadi, Sonhaji Sonhaji, & Wulan Marlia Sandi. (2024). Prototype Pendeteksi Beban Berlebih Untuk Keamanan Operasi Hydraulic Crane Di Kapal Penumpang. Jurnal Teknik Mesin, Industri, Elektro Dan Informatika, 3(3), 15–31. https://doi.org/10.55606/jtmei.v3i3.4082

Issue

Vol. 3 No. 3 (2024): September : JURNAL TEKNIK MESIN, INDUSTRI, ELEKTRO DAN INFORMATIKA

Section

Articles

License

Copyright (c) 2024 Jurnal Teknik Mesin, Industri, Elektro dan Informatika

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.