Penerapan Metode Failure Mode Effect And Analisys (FMEA) Pada Proses Penambahan Gudang
DOI:
https://doi.org/10.55606/jtmei.v3i1.3316Abstract
This research uses the Failure Mode Effect and Analysis (FMEA) method which is used to evaluate and analyze the causes of problems in the process of adding a new warehouse due to overstorage in the fertilizer storage warehouse. Where in this research it is known that the dominant causal factor that causes this problem is that it is difficult to obtain a warehouse according to the location needed and the warehouse procurement process takes quite a long time. From these dominant problems, alternative improvements were obtained to overcome these problems so that the process of adding a new warehouse could run effectively and efficiently in terms of time and cost
Downloads
References
Afifah, V., & Setyantoro, D. (2021). Rancangan Sistem Pemilihan dan Penetapan Harga dalam Proses Pengadaan Barang dan Jasa Logistik Berbasis Web. Jurnal IKRA-ITH INFORMATIKA, 5(2), 108–117.
Firdaus, I. Z., Purwoko, P., & Setyawan, R. R. (2022). Analisis Pengaruh Kualitas Produk, Harga, Distribusi Dan Merek Terhadap Minat Beli Konsumen. Jurnal Ilmiah Manajemen, Ekonomi, & Akuntansi (MEA), 6(3), 1466–1478. https://doi.org/10.31955/mea.v6i3.2491
Firnando, O., Novita, D., & Ahluwalia, L. (2021). Analisis Pengaruh Saluran Distribusi dan Promosi pada Keputusan Pembelian Produk (Survey pada Konsumen PT Inti Bharu Mas Lampung). Journal Strategy of Management and Accounting through Research and Technology (SMART), 1(1), 31–37.
Karimah, C., Arso, S. P., & Kusumastuti, W. (2020). Analisis Pengelolaan Obat pada Tahap Pengadaan di Rumah Sakit Roemani Muhammadiyah Semarang. Jurnal Kesehatan Masyarakat (e-Journal), 8(2), 182–187.
Monoarfa, M. I., Hariyanto, Y., & Rasyid, A. (2021). Analisis Penyebab bottleneck pada Aliran Produksi briquette charcoal dengan Menggunakan Diagram fishbone di PT. Saraswati Coconut Product. Jambura Industrial Review (JIREV), 1(1), 15–21. https://doi.org/10.37905/jirev.1.1.15-21
Prasetyo, Y. T., & Fudhla, A. F. (2021). Perbaikan Tata Letak Fasilitas Gudang Dengan Pendekatan Dedicated Storage Pada Gudang Distribusi Barang Jadi Industri Makanan Ringan. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 7(1), 1. https://doi.org/10.24014/jti.v7i1.11283
Priambodo, B., Nursanti, E., & Laksmana, D. I. (2021). Analisa Risiko Lift ( Elevator ) dengan Metode FMEA. Jurnal Teknologi Dan Manajemen Industri, 7(2), 7–12.
Rinoza, M., & Ahmad Kurniawan, F. (2021). Analisa Rpn (Risk Priority Number) Terhadap Keandalan Komponen Mesin Kompresordouble Screw Menggunakan Metode Fmea Di Pabrik Semen Pt. Xyz. Buletin Utama Teknik, 17(1), 1410–4520.
Saputra, R., & Santoso, D. T. (2021). Analisis Kegagalan Proses Produksi Plastik Pada Mesin Cutting Di Pt. Fkp Dengan Pendekatan Failure Mode and Effect Analysis Dan Diagram Pareto. Barometer, 6(1), 322–327. https://doi.org/10.35261/barometer.v6i1.4516
Wirawati, S. M., & Juniarti, A. D. (2020). Pengendalian Kualitas Produk Benang Carded Untuk Mengurangi Cacat Dengan Menggunakan Failure Mode and Effect Analysis (Fmea). Jurnal Intent: Jurnal Industri Dan Teknologi Terpadu, 3(2), 90–98. https://doi.org/10.47080/intent.v3i2.954
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal Teknik Mesin, Industri, Elektro dan Informatika
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
