Analisis Teknologi Corrosion Coupon Dalam Deteksi Korosi Pipa Gas Ruas Gresik-Semarang Dengan Metode FMEA

Authors

  • Ayyasy Nugroho Universitas Pembangunan Nasional “Veteran” Jawa Timur
  • Rizqi Novita Sari Universitas Pembangunan Nasional “Veteran” Jawa Timur

DOI:

https://doi.org/10.55606/jtmei.v3i1.3270

Keywords:

Corrosion Coupon, Failure Mode Effects Analysis (FMEA), Gas, Pipe

Abstract

PT Pertamina Gas is a big company that carries out transportation business or as a gas transporter through a transmission pipe. Gas pipes must be monitored regularly so that they do not experience damage, cracks, corrosion or even leaks. This research was conducted to analyze one of the pipe monitoring technologies, namely corrosion coupon monitoring to detect internal pipe corrosion using a failure mode effect (FMEA) method. Through fishbone identification, corrosion is classified into 6 factors, namely material (related to gas), method, people, machines, pipe facilities, and environment. Based on the FMEA method, it was found that the main cause of corrosion is material factors or comes from gas with a defect severity (S) value of 8, occurrence (O) of 6, and detection (D) of 3, with a total RPN of 144. With this research, it is hoped that the company can prioritize these causal factors and carry out corrosion control.

References

Afradi, A., Lapisa, R., & Wahyudi, R. (2021). Pengaruh Perubahan Temperatur terhadap Laju Korosi pada Knalpot Motor. Jurnal of Mechanical Electrical and Industrial Engineering, 3(2), 59-68.

Dewi, A. A., & Yuamita, F. (2022). Pengendalian Kualitas pada Produksi Air Minum Dalam Kemasan Botol 330 Ml Menggunakan Metode Failure Mode Effect Analysis (FMEA) di PDAM Tirta Sembada. Jurnal Teknologi dan Manajemen Industri Terapan, 1(1), 15-21. https://doi.org/10.55826/tmit.v1iI.4.

Hafydhz, I. A., Moralista, E., & Usman, D. N. (2018). Penentuan Laju Korosi dan Sisa Umur Pakai (Remaining Service Life / RSL) Pada Jalur Pipa Transportasi Gas Jumper Simpang Brimob – NFG (Non Flare Gas) Mundu di PT Pertamina EP Asset 3 Jatibarang Field Kabupaten Indramayu Provinsi Jawa Barat. Jurnal Prosiding Teknik Pertambangan, 4(2), 647-657. http://dx.doi.org/10.29313/pertambangan.v0i0.13349.

Khrisdamara, B., & Andesta, D. (2022). Analisis Penyebab Kerusakan Head Truck-B44 Menggunakan Metode FMEA dan FTA (Studi Kasus PT Bima, Site Pelabuhan Berlian). Jurnal Serambi Engineering, 7(3), 3303-3313. https://doi.org/10.32672/jse.v7i3.4255.

Lestari, D. E., Pujiarta, S., & Utomo, S. B. (2016). Pemantauan Korosi pada Sistem Pendingin Sekunder Reaktor RSG-GAS Menggunakan Coupon Corrosion. Prosiding Seminar Nasional Teknologi dan Aplikasi Reaktor Nuklir, 125-131.

Sirait, D. S., & Arwati, I. G. A. (2019). Analisa Sistem Proteksi Katodik Anoda Korban pada Jaringan Pipa Onshore Stasiun Penerimaan Gas Pagardewa. Jurnal Teknik Mesin Mercu Buana, 1-12. https://dx.doi.org/10.22441/jtm.v8i3.5025.

Sugeng, M., Ismail, F. M., & Utomo, J. P. (2022). Analisis Perbedaan Laju Korosi Hasil Pengujian Weight Loss dan Polarisasi pada Pipa dengan Pengujian Korosi Standar ASTM G59 dan ASTM G31. Jurnal Tera, 2(1), 48-56. http://jurnal.undira.ac.id/jurnaltera/article/view/148.

Downloads

Published

2023-12-28

How to Cite

Ayyasy Nugroho, & Rizqi Novita Sari. (2023). Analisis Teknologi Corrosion Coupon Dalam Deteksi Korosi Pipa Gas Ruas Gresik-Semarang Dengan Metode FMEA . Jurnal Teknik Mesin, Industri, Elektro Dan Informatika, 3(1), 151–164. https://doi.org/10.55606/jtmei.v3i1.3270

Issue

Vol. 3 No. 1 (2024): Maret : JURNAL TEKNIK MESIN, INDUSTRI, ELEKTRO DAN INFORMATIKA

Section

Articles

License

Copyright (c) 2023 Jurnal Teknik Mesin, Industri, Elektro dan Informatika

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.