Analisis Kualitas Rotogravure pada Bagian Printing dengan Menggunakan Metode Failure Mode and Effect Analysis dan Fault Tree Analysis di PT. Diantrijaya Mukti Utama
DOI:
https://doi.org/10.55606/jtmei.v2i4.3027Keywords:
Quality Control, FTA, FMEAAbstract
One company that produces rotogravure products is PT. Diantrijaya Mukti Utama. The company implements a make to order production system. In this research, problems were found in the rotogravure production section. Namely in the form of damage to the printing machine with the average age of the machine being still young but often causing defects. The aim of this research is to identify potential failures on printing machines, find out the root causes of their occurrence on printing machines using the fault tree analysis method and produce alternative recommendations for improvement using the Failure Mode and Effect Analysis method in the printing process at PT Diantrijaya Mukti Utama. The research results showed that there were 3 types of defects in the PT printing process. Diantrijaya Mukti Utama, namely hazing defects, streaks and ink fading with a chance of defects occurring of 0.03%, 0.005%, 0.013%. Of these three defects, the causes of defects include workers being less skilled in setting the doctor blade, the doctor blade being used being damaged. Recommended improvements are to provide training related to the use of doctor blades to workers so they can know how to use and care for the doctor blades used
References
Ahyari. Agus 2002. Manajemen Produksi; Pengendalian Produksi, edisi empat, Buku Dua. BFPE: Yogyakarta.
Arinda, Dkk. 2022. Perbaikan Potensi Kegagalan pada Stasiun Kerja Perble Perusahaan Tekstil. Jurnal Manajemen Industri dan Teknologi, Vol 3. No 3. Pp 13-24.
Ayu, Mina. 2021. Analisis Defect Proses Produksi Songkok Berbasi Metode FMEA dan FTA di Home Indsutri Songkok GSA Lamongan. Serambi Engineering, Vol 6. No 3. Pp 2197-2206.
Bimby, Dkk. 2022. Analisis Penyebab Kerusakan Hed Truck B-44 Menggunakan Metode FMEA dan FTA. Jurnal Serambi Engineering, Vol 7. No 3 Pp 3303-3313.
Clemens. 2002. Fault Tree Analysis- A History. 17 th International System Safet Conferencee.
Feigenbaum, Armand V. 1991. Total Quality Control. Trind Editions New York: McGraw Hill Inc.
Hairiyah, N., Raden, R. A., & Eva, L. 2019. Analisis Statistical Quality Control (SQC) pada Produksi Roti di Armenia Bakery. Indsutria: Jurnal Teknologi dan Manajemen Agroindustri. Vol.8, No. 1 pp 41-48.
Heizer, Jay dan Barry Render. 2001. Prinsip-Prinsip Manajemen Operasi: Operation Management. Jakarta: Salemba Empat.
Husein, K., dan Rochmoeljati. 2021. Meminimasi Cacat Produk Bogie Tipe S2e9c Menggunakan Metode Statistical Quality Control (SQC) Dan Failure Mode Effect Analysis (FMEA) pada PT XYZ. Juminten : Jurnal Manajemen Industri dan Teknologi. Vol. 02, No. 02, pp. 168-179.
Ishikawa, K dan David J.Lu. 1990. Pengendalian Mutu Terpadu.Diterjemahkan oleh H.W. Budi Santoso, Bandung: Remaja Rosdakarya.
Juran, J.M. 2007. Kepemimpinan Mutu. Diterjemahkan oleh Edi Nugroho. Jakarta: Pustaka Binaman Pressindo.
Khaerudin. D dan Rahmatullah A. 2020. Implementasi Methode PDCA Dalam Menurunkan Defect Sepatu Tipe Campus Di PT. Prima Intereksa Indastri (PIN). Jurnal Sains dan Teknologi. Vol.20. No 1.
Kristiansen, Svein. 2005. Maritime Transportation Safet Management Risk Analysis. London: Great Britain.
Mayangsari, Dkk. 2020. Analisis Pengendalian Kualitas Produk Isolator Dengan Metode Failure Mode and Effect Analyis (FMEA) dan Fault Tree Analysis (FTA). Jurnal Institut Teknologi Nasional.
McDermott, Robin E. 2009. The Basic of FMEA 2nd Edition. Textbook. ISBN 978- 1- 56327-377-3.
Prakasa, M. I. 2020. Analisis Perbaikan Kualitas CPO dengan Metode SQC dan Failure Mode and Effect Analysis (FMEA) pada PT. Perkebunan Nusantara IV Unit Usaha Gunung Bayu. Skripsi. Jurusan Teknik Industri. Fakultas Teknik. Universitas Sumatera Utara. Medan.
Prawirosentono, Suyadi. 2007. Manajemen Operasi (Operations Management): Analisis Dan Studi Kasus (Edisi 4) Penerbit Bumi Aksara, Jakarta.
Suseno dan Syahrizal I.K. 2022. “Pengendalian Kualitas Cacat Produk Tas Kulit Dengan Metode Failure Mode And Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA) di PT Mandiri Jogja Internasional”. Jurnal Cakrawala Ilmiah. Vol. 01, No, 06, pp. 1307-1320.
Suwandi, A., Teuku Y. Z., & Akhmad H. 2020. Minimization of Pipe Production Defects using the FMEA method and Dynamic System. International Journal of Engineering Research and Technology. Vol. 13 No. 5. pp 953.
Wicaksono, A. Yuamita, F. 2022. Pengendalian Kualitas Produksi Sarden Menggunakan Metode Failure Mode and Effects Analysis (FMEA) Untuk Meminimumkan Cacat Kaleng di PT. Maya Food Industries. Jurnal Teknologi dan Manajemen Industri Terapan. Vol. 1 No 1, Hal 1-6.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal Teknik Mesin, Industri, Elektro dan Informatika
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
