Penerapan Six Sigma Dalam Pengendalian Kualitas Produk Mebel Pada PT Alis Jaya Ciptatama
DOI:
https://doi.org/10.55606/jtmei.v2i3.2290Keywords:
Six Sigma, Pareto Diagram, DMAI, DPMO, 5S, SOPAbstract
The obstacle faced by PT Alis Jaya Ciptatama is that the production process carried out in 2022 still has many product defects. For this reason, it is necessary to improve the quality of the product. In this case the method used is the Six Sigma method as a quality improvement tool. The results of analysis using Pareto diagrams obtained the highest type of defect with a percentage of 38.2%, and there are three elements that influence this type of defect, namely human, machine and material elements. Through DMAI analysis, the company's average sigma value of 2.70 is still far from the company's expectations of 6, with a Defect Por Million Opportunities (DPMO) of 115362.894. This value is the most critical failure mode so it needs to be repaired. The proposed improvement is by implementing 5S and providing Standard Operating Procedures (SOP) so that operators work in accordance with operational standards in the mill 1 work area. Then a comparison is made between before and having been given the SOP, so the DPMO value is 72,666 and the sigma value is increased by 0.53.
References
Astusii, R, D., & Lathiifurahman, L. (2020). Apliikas Leian Siix Siigma Untuk Meingurangii Peimborosan Dii bagiian Packagiing Seimein. JIiSIi: Jurnal Iinteigrasii Siisteim Iindustrii, 7(2), 143.
Bonar H, Luthfii P & An Ama Laiilan F. (2018). Analiisiis Peingeindaliian Kualiitas Deingan Meinggunakan Meitodei Siix Siigma Study Kasus PT. Growth Sumatra Iindustrii. IiSSN : 2598-3814.
Diidiiharyono, Marsal, & Bakhtiiar. (2018). Analiisiis Peingeindaliian Kualiitas Produk Deingan Meitodei Siix Siigma Pada Iindustrii Aiir Miinum PT Aseira Tiirta Posiidoniia, Kota Palopo Qualiity Control Analysiis Of Productiion wiith Siix Siigma Meithod iin. Jurnal Saiinsmat, VIiIi(2), 163-176.
Haiiriiyah, N. (2020). Peineirapan Siix Siigma Untuk Meimpeirbaiikii Kualiitas Rotii Dii Ud. Cj Bakeiry [Appliicatiion of siix siigma to iimprovei thei breiad qualiity Iin UD. CJ Bakeiry]. Jurnal Teiknologii & Iindustrii Hasiil Peirtaniian, 25(1), 35.
Siiriinei, H., & Kurniiawatii, Ei. P., (2018). Peingeindaliian Kualiitas Meinggunakan Meitodei Siix Siigma (Studii Kasus pada PT. Diiras Conceipt Sukoharjo). AJIiEi- Asiian Journal of iinnovatiion and Einteirpreineiurshiip, 02(03), 254-290.
Heiiizeir, Jay and Barry Reindeir. 2006. Opeiratiions Manageimeint (ManajeimeinOpeirasii). Jakarta : Saleimba Eimpat.
Iibrahiim, Djauhar Ariifiin & Aniita Khaiirunniisa, (2019). Analiisiis Peingeindaliian Kualiitas Meinggunakan Meitodei Siix Siigma Deingan Tahapan DMAIiC Untuk Meingurangii Jumlah Cacat Pada Produk VIiBRATIiNG ROLLEiR COMPACTOR dii PT. Sakaii Iindoneisiia.
Kartiinii,Ii. A. N., & Syariieif, D. J. (2018). Qualiity Control Analiisiis Wiith Siix Siigma Dmaiic Meithod iin Eiffort Numbeir of Sugar Products At Pt. Pg. Gorontalo. Siineirgii : Jurnal Iilmiiah Iilmu Manajeimein, 8(2), 1-6.
Lariicha Salomon, L., Niickholaus Deinata Liimanjaya, A., & Kuncii, K. (2015). Strateigii Peiniingkatan Mutu Part Beiniing Meinggunakan Peindeikatan Meitodei siix Siigma (Studii Kasus: Deiparteimeint Iinjeictiion Dii Pt. Kg). Iin Jurnal Iilmu Teikniik Iindustrii (Vol. 3, Iissuei 3).
Mada, M. S. N. dan Ei. (2018). Meitodei Siix Siigma untuk Meingeindaliikan Kualiitas Produk Surat Kabar dii PT. X Margiiei. Jurnal Iilmiiah Teikniik Iindustrii Priima, 2(1), 15-21.
Naiilul Iizzah & Muh Fahrur Rozii. (2019). Analiisiis Peingeindaliian Kualiitas deingan Meitodei Siix Siigma-Dmaiic dalam Upaya Meingurangii Keicacatan Produk Reibana pada UKM Alfiiya Reibana. Jurnal Iilmiiah SOULMATH, Vol 7(1).
Rohanii, q. A., & Suhartiinii. (2021). Analiisiis Keiceilakaan Keirja deingan Meinggunakan Meitodei Riisk Priioriity Numbeir, Diiagram Pareito, Fiishbonei, dan Fiivei why’s Analiisiis. Prosiidiing SEiNASTIiTAN,1, 136-143.
