Studi Kasus Simulasi Konfigurasi Jaringan Scada Antara Gedung A dan Gedung B Menggunakan Aplikasi Cisco Packet Tracer

Authors

  • Intan Puspitasari Universitas Sultan Ageng Tirtayasa
  • Muhamad Ryan Agustin Universitas Sultan Ageng Tirtayasa
  • Nuga Pratama Universitas Sultan Ageng Tirtayasa
  • Didik Aribowo Universitas Sultan Ageng Tirtayasa

DOI:

https://doi.org/10.55606/jtmei.v2i2.1602

Keywords:

Network, Communication, SCADA

Abstract

The purpose of this article aims to analyze technological developments in the industrial sector. SCADA requires a communication protocol. To increase efficiency in the industrial world, the SCADA system has been widely used in various industrial fields, such as manufacturing, power generation, oil and gas, telecommunications and transportation. Control over the arrangement of an electric power distribution network can be effective and efficient and will be equipped with a SCADA system. Control of the electric power network based on the SCADA system is really necessary considering that the growth of electric power is very high and adds to the increasing complexity of the electric power network system. The SCADA system ((Supervisory Control And Data Acquisition) itself is a system created for data retrieval, storage, analysis and also for controlling a plant/system that has been used remotely.

                                                                     

 

References

Clarke, Gordon And Deon Reyders. 2004. Practi cal Modern SCADA Protocols: DNP3, 60870.5 and Related Systems. Oxford : Newness.

API Standard 1164. 2009. Pipeline SCADA Secu rity.Washington : API.

Dwiyanto, M., & Nitisasmita, K. M. (2015). Proto tipe sistem Otomasi Berbasis PLC dan SCADA Network Client Server dengan Multi Protokol Komunikasi. Depok, PNJ.

Fitria, D., Effendi, I., & Ahmad, H. (2014). Analisa Pelepasan Beban Pada Sistem Scada P3B Sumbagsel. Jurnal Desiminasi Teknologi, 2(1).

Insani, A. (2013). Disain Sistem SCADA jarak Jauh Menggunakan Layanan VPN 3G Un tuk Penggerak Pompa pada Sistem Pen golahan Air. Buletin Pos dan Telekomu nikasi, 11(1),

-76.6

Julianto, K., Nugraha, D. W., & Dodu, A. E. (2014).Evaluasi Penggunaan Scada Pada Keandalan

Sistem Distribusi PT. PLN (Persero) Area Palu. Mektrik, 1(1).

Sofwan, A., Kurniawati, Y., & Amoriza, R. (2005). Analisis penyebab out of scanning pada SCADA akibat gangguan RTU. In Seminar Nasional Aplikasi Teknologi Informasi(SNATI).

Suprapto, B. Y. (2012). Prototipe monitoring pengeringan blanket karet menggunakan Supervisory Control and Data Acquisition (SCADA). In Prosiding Seminar Nasional SciEtec.

Thoullah, C. K., & Tasyriqan, I. (2019). Asesmen Kerentanan Keamanan Informasi Sistem SCADA Dengan Metode Octave Alle gro. Innovative Creative and Information Technology, 5(2), 181-190

Downloads

Published

2023-05-09

How to Cite

Intan Puspitasari, Muhamad Ryan Agustin, Nuga Pratama, & Didik Aribowo. (2023). Studi Kasus Simulasi Konfigurasi Jaringan Scada Antara Gedung A dan Gedung B Menggunakan Aplikasi Cisco Packet Tracer. Jurnal Teknik Mesin, Industri, Elektro Dan Informatika, 2(2), 16–24. https://doi.org/10.55606/jtmei.v2i2.1602