Pengaruh Penggunaan Sensor Tingkat Minyak pada Sistem Monitoring Tangki Bahan Bakar Alat Berat Bulldozer
DOI:
https://doi.org/10.55606/jcsr-politama.v2i3.3901Keywords:
Bulldozer, fuel indicator, fuel level sensor, angleAbstract
A bulldozer is a heavy equipment used to dig, push and move soil or coal material. The problem that often occurs with the D85ESS-2 bulldozer unit is that the unit often runs out of fuel. The D85ESS-2 bulldozer with serial number or SN.J11888 does not have a fuel indicator on the dashboard, so it must be checked every time. The purpose of this research is to analyze and measure the impact of the sensor rod angle and the physical condition of the float on the sensor on the accuracy of the fuel sensor. This research uses a quantitative method by modifying the size of the angle on the sensor by 75º, 85º (standard) and 95º and by adding variations in the physical condition of the float (good condition and 1 cm crack). The test was carried out using a variation in the amount of fuel of 50% or 205 liters. The results of this research indicate that the accuracy of measurements on the sensor is influenced by the physical condition of the buoy and the size of the angle. The highest result occurred at an 85º angle with a good float of 97.78%, while the lowest result was 73.32% at a 95º angle with a 1 cm cracked float condition.
Downloads
References
Dianastiti, Yelma, Anggara Ardiyanta, Wahyu Cahyadi, Warju Warju, & Muhammad Pratama. (2022). Rancang Bangun Fuel Flow Meter Untuk Mengukur Konsumsi Bahan Bakar Mesin Sepeda Motor Empat Langkah. Otopro, 18(1), 13-17. https://doi.org/10.26740/otopro.v18n1.p13-17
Erwin Asmara, Rega Gagana, & Dwisetiono. (2022). Analisa Kegagalan Sistem Bahan Bakar Kapal Dengan Menggunakan Metode Preliminary Hazard Analysis (PHA) Dan Fault Tree Analysis (FTA). Hexagon Jurnal Teknik Dan Sains, 3(1), 34-39. https://doi.org/10.36761/hexagon.v3i1.1348
Mahmuda, Yudi, Suwarno, & Syarifah Muthia Putri. (2018). Journal of Electrical and System Control Engineering Rancang Bangun Sistem Monitoring Pemakaian Design of the Usage Monitoring System. Journal Of Elctrical and System Control Engineering, 2(1).
Pratama, Dana Rian, Gunarko, & Anang H. Dwi. (2020). Modifikasi Sistem Bahan Bakar Konvensional Pada Kendaraan Dinas Feroza Menggunakan Sistem Injeksi. Otoranpur, 1(1), 1-9.
Purwono, Hendro, Rasma, Reza Febriano Armas, Muhamad Ikshan Ramadhan, & Alan Ramadhan. (2023). Analisa Kebocoran Oli Pada Penggerak Akhir Unit Bulldozer Komatsu D85ESS-2 Hendro, 14(1), 44-50.
Purwono, Hendro. (2018). ANALISIS KEBOCORAN AIR PENDINGIN DARI RADIATOR PADA BULLDOZER TIPE D375A-5, 1-7.
Samudra, Gian, & Djogi Lubis. (2018). Rancang Bangun Sistem Monitoring Indikator Bbm Pada Genset Gns-2500. Seminar Nasional Fortei Regional 7 (SINARFE 7), 1, 53-58.
Zahri, Arrijal, Herodion Mela, & George R. Hutagaol. (2024). Cara Kerja Serta Perawatan Dan Perbaikan Sistem Injeksi Bahan Bakar Elektronik ( Efi ) Pada Mesin Diesel 2 . 500 Cc, 1-7.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Journal of Creative Student Research

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.