Analisa Performansi Mesin Diesel MAK 8M453 Tipe 4 Langkah dengan Daya Terpasang 2500 kW
DOI:
https://doi.org/10.55606/juprit.v1i4.630Keywords:
diesel engine cycle, performance, engine horsepower.Abstract
In actual diesel engine work cycle is part of the heat input that occurs at constant volume and partly at constant pressure. Therefore, in the calculation of the design of the modern diesel motor cycle, a limited pressure air cycle (combined cycle) is used. The purpose of this study is to analyze the performance of the diesel engine in the PLTD Tenau-Kupang and to find out the deviations or losses that occur in the diesel motor work cycle. From the results of the research in the form of an analysis of calculations at 600 rpm engine speed, it can be concluded that the basic factors of the performance of an engine include the average effective pressure (MEP), piston speed, ratio of stroke length and cylinder diameter, number of cylinders, and calculations for power. The resulting motor is close to the actual motor power.
References
Arismunandar W. 2002, Penggerak Mula Motor Bakar, ITB, Bandung.
Cengel A.Y. 2006, Thermodynamics : An Engineering Approach, 5th editon. McGraw-Hill, New York.
Garret T.K, Newton K, Steeds W. 2001, The motor Vehicle, 13th edition. A division of Reed Educational and Professional Publishing Ltd, England.
Khovakh M. 1979, Motor Vehicle Engines, Mir Publishers, Moscow.
Moran J.M, Shapiro N.H. 2006, Fundamentals of Engineering Thermodynamics, John Wiley & Sons,Inc, England.
Petrovsky N. 1979, Marine Internal Combustion Engines, Mir Publishers, Moscow.
Swiss Contact. 1997, Sistem Bahan Bakar Motor Diesel, Segar Jakartaku, Jakarta.
Woodyard D. 2004, Pounder’s Marine Diesel Engines and Gas Turbines, 8th edition. Elsevier Ltd, England.
