Penerapan Metode Six Sigma dalam Menganalisa Pengendalian Kualitas Produk Beng-Beng pada Divisi Wafer PT Mayora Indah Tbk
DOI:
https://doi.org/10.55606/juprit.v3i4.4319Keywords:
Quality Control, Six Sigma, DMAIC, DPMOAbstract
PT. Mayora Indah Tbk. (Company) was founded in 1977 with the first factory located in Tangerang with a target market in the Jakarta area and surrounding areas. PT Mayora Indah Tbk. has been able to prove itself to be one of the quality and high quality food producers and is called a market leader who has succeeded in creating a number of products that have pioneered each of these product categories. This company has several departments, one of which is the Production Department. Before conducting research, researchers first recorded all production defects for the period Mei 2023 – April 2024. Based on the results of research using the Six Sigma method, it was found that in the Production Department, the Wafer Division had the most defective products with a total of 63.460 pcs. Six Sigma implementation is an approach to improving product or service quality by reducing variability and process errors. This involves the steps Define, Measure, Analyze, Improve, and Control. Factors that cause production defects are caused by several things, including Man, Methods, Machine, Material and Environment
Downloads
References
Aditya, K. A., & Puspitasari, N. B. (2023). Analisis Penyebab Defect Produk Wafer Roll 8,5 Gram pada Proses Packing PT. Dua Kelinci. Industrial Engineering Online Journal, 12(4).
Andjar Sari, S., & Indriani, S. (2022). Seminar Nasional 2022 ITN Malang.
Ansori, F. A., & Nugraha Gusniar, I. (2023). Penerapan Metode Seven Tools pada Pengendalian Kualitas Produk Cacat di PT. XYZ. VIII(2).
Arianti, M. S., Rahmawati, E., dan Prhati
ingrum, Y. (2020). Analisis Pengendalian Kualitas Produk dengan Menggunakan Statistical Qualitu Control (SQC) pada Usaha Amplang Karya Bahari di Samarinda. Jurnal Bisnis Dan Pembangunan. 9(2): 1–13.
Aziza, N., & Setiaji, F. B. (2020). PENGENDALIAN KUALITAS PRODUK MEBEL DENGAN PENDEKATAN METODE NEW SEVEN TOOLS. Teknika : Engineering and Sains Journal, 4(1), 27–34.
Dio Indranata, M., & Andesta, D. (2022). Pengendalian Kualitas Produk Kerupuk Bawang Menggunakan Metode Seven Tools (Studi Kasus: UMKM Kerupuk Dinda). Serambi Engineering, VII(2).
Fatimah, S., & Wahyuni, H. C. (2023). Product Quality Control Using Six Sigma Methods and Seven Tools in the PDL Shoe Industry. Tibuana : Journal of Applied Industrial Engineering, 6(1), 12–22. 81
Jurnal Bisnis & Kewirausahaan, 16(2), 2020. http://ojs.pnb.ac.id/index.php/JBK Rofieq, M.,& Septiar i, R. (2022). PENERAPAN SEVEN TOOLS DALAM PENGENDALIAN KUALITAS BOTOL PLASTIK KEMASAN 60 ML.
Komang Dartawan, I., & Setiafindari, W. (2023). Pengendalian Kualitas Menggunakan Metode Seven Tools Dan Kaizen Produk Polypropylene Pada PT KMPI. JTMEI), 2(2), 209–221. https://doi.org/10.55606/jtmei.v2i2.186 1
Meilyta, H. D., Biasane, A. N., & Tiwow, C. (2023). Perbandingan Penjualan “Produk Wafer” Menurut Jenisnya (Studi Kasus PT. Indomarco Prismatama di KarawangJawa Barat). Fokus : Jurnal Manajemen Dan Bisnis, 5(2), 2–10.
Probokusumo, Susanti, A., & Hartini, S. (2022). Analysis of Defective Quality Control of Powdered Drinks Using The Six Sigma Method on Multilane Machines. Journal of Industrial Engineering Management, 7(3), 195–202. https://doi.org/10.33536/jiem.v7i3.1082
Rahayu, P.,& Bernik, M. (2020). Peningkatan Pengendalian Kualitas8 Produk Roti dengan Metode Six Sigma Menggunakan New & Old 7 Tools.
Roma Sandwich Menggunakan Metode Statistik Quality Control (SQC) dalam Upaya Menurunkan Reject di Bagaian Packing. Journal Industrial Manufacturing, 5(1), 1–12.
Suryatman, T. H., Kosim, M. E., & Julaeha, S. (2020). Pengendalian Kualitas Produksi
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Jurnal Penelitian Rumpun Ilmu Teknik
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
