Usulan Rancangan Kursi Kerja yang Ergonomis Bagi Pengrajin Batik Tulis pada UMKM Batik Rajasamas Maos
DOI:
https://doi.org/10.55606/juprit.v3i2.4214Keywords:
Ergonomics, RULA, AntropometriAbstract
UMKM Batik Rajasamas Maos produces various types of batik, one of which is hand-written batik. The work process for making written batik at UMKM Batik Rajasamas Maos is still done manually and does not pay attention to a comfortable working environment for workers. In the science of ergonomics there are important things about working posture and the movements carried out by humans. This research was conducted to make a proposal for a chair design for batik craftsmen using the RULA (Rapid Upper Limb Assessment) method analysis. The RULA method is a fast method for assessing upper body posture. After carrying out this research, it is known that the ergonomic risk level of batik craftsmen's working posture requires further investigation and in the future, replacing the old work chair with a new work chair designed based on an anthropometric approach. A new work chair that has been designed based on an anthropometric approach.
Downloads
References
Abdillah, F. (2013). Analisis postur kerja dengan metode Rapid Upper Limb Assessment (RULA) pada pekerja kuli angkut buah di “Agen Ridho Illahi” Pasar Johar Kota Semarang. Jurnal Kesehatan Masyarakat, 2, 1–10.
Arifin, A. N. (2020). Analisis sikap kerja terhadap musculoskeletal disorder pada pembatik Suka Maju Giri Loyo Yogyakarta. Universitas Negeri Semarang.
Burnawi, N. H. (2015). Analisis postur tubuh ibu menyusui dalam posisi duduk menggunakan Rapid Upper Limb Assessment Kelurahan Pisangan Tahun 2014. Universitas Islam Negeri Syarif Hidayatullah.
Demartoto, A. (2017). Representasi semangat berbagi ekofeminisme melalui batik tulis. Palastren, 10, 47–65.
Dzikrillah, N., & Yuliani, E. N. S. (2017). Analisis postur kerja menggunakan metode Rapid Upper Limb Assessment (RULA): Studi kasus PT Tj Forge Indonesia. Jurnal Ilmiah Teknik Industri, 3(3), 150–155. https://doi.org/10.24912/jitiuntar.v3i3.466
Erliana, C. I., & Amri, K. (2020). Analisis postur kerja menggunakan metode Rapid Upper Limb Assessment (RULA) pada proses pembuatan plat sambung tiang pancang PT Wijaya Karton Beton, Tbk Binjai. Industrial Engineering Journal, 9(1). https://journal.unimal.ac.id/miej/article/view/496
Fatejarum, A., & Susianti. (2018). Hubungan postur kerja dan repetisi terhadap kejadian keluhan muskuloskeletal pada petani. J Agromedicine, 5, 518–523.
Hunusalela, Z. F., Perdana, S., & Dewanti, G. K. (2022). Analisis postur kerja operator dengan metode RULA dan REBA di Juragan Konveksi Jakarta. Jurnal IKRAITH-TEKNOLOGI, 6(58), 1–10.
Kerdiati, N. L. K. R., & Darmastuti, P. A. (2019). Canting cap batik sebagai elemen pembentuk suasana etnik pada interior komersil. In Prosiding Seminar Nasional Desain Dan Arsitektur (SENADA) (Vol. 2, pp. 527–534).
Malik, M. R., Alwi, M., Wolok, E., & Rasyid, A. (2021). Analisis postur kerja pada karyawan menggunakan metode RULA (studi kasus area control room, Joint Operating Body Pertamina-Medco E&P Tomori Sulawesi). Jambura Industrial Review (JIREV), 1(1), 22–29. https://doi.org/10.37905/jirev.1.1.22-29
Masruri, A. A., & Patradhiani, R. (2019). Faktor ergonomi terkait kenyamanan ruang kelas Fakultas Teknik Universitas Muhammadiyah Palembang. Jurnal Ilmiah Teknik Industri, 4, 40–48.
Mukaddam, S. S. (2017). Kajian estetis dan proses pembuatan batik Cilacap di Desa Maos Kidul Kecamatan Maos Kabupaten Cilacap. Universitas Negeri Semarang.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Jurnal Penelitian Rumpun Ilmu Teknik
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
