Sistem Monitoring Limbah Oli Menggunakan Arduino Uno Berbasis Lora
DOI:
https://doi.org/10.55606/juprit.v3i2.3722Keywords:
Waste oil, ESP32 Microcontroller, Lora, pH Sensor, Turbidity SensorAbstract
Oil is one of the essential lubricating materials for machinery, especially on ships. With the abundant use of oil, waste oil is generated from the remaining oil discharge, causing dirty oil to become waste oil. To monitor the disposal of waste oil by ships, "Waste Oil Monitoring System Using LoRa-Based Arduino Uno" has been created. This tool is also equipped with sensors that can distinguish seawater and waste oil and uses the LoRa system. This method involves researching problems that exist in the shipping environment. The presence of waste oil pollution was successfully detected in the results of this study, and can be monitored remotely through an LCD display with LoRa. In this case study, the device made can detect waste oil and can distinguish it from sea water. The purpose of making this tool is to detect the presence of oil in sea waters in order to reduce and prevent waste oil pollution that can spread widely in sea waters. The system can function properly because there is an error of 2.18% in the fresh water test, 2.08% in the seawater test, 4.55% in the oil test, and 3.08% in the seawater and oil mixture test compared between the pH sensor and the pH meter. The system can work well using LoRa Ra-02, and the transmitted data can be reached stably at a distance of 205m, but if it exceeds that distance, the data can no longer be received by the receiver or becomes invalid.References
Ashshiddiq, R., & Rahmadya, B. (2023). Rancang alat pengukur tekanan darah otomatis berbasis Internet of Things. CHIPSET, 4(01), 23-35.
Azharuddin, S., & Ariasya, M. A. (2020). Proses pengolahan limbah B3 (oli bekas) menjadi bahan bakar cair dengan perlakuan panas yang konstan. Jurnal Austenit, 48-53.
Banjarnahor, D. (2022). Rancang bangun alat monitoring penyiraman tanaman otomatis dengan NodeMCU berbasis Internet of Things (IoT) (Disertasi, Universitas Medan Area).
Effendi, H., & Puspitaningrum, R. (2021). Rancang bangun sistem monitoring pemakaian air PAM dan mutu air pada komplek perumahan dengan jaringan nirkabel LoRa berbasis Arduino Uno. Sinusoida, 23(1), 50-60.
Githa, D. P., & Swastawan, W. E. (2014). Sistem pengaman parkir dengan visualisasi jarak menggunakan sensor ping dan LCD. Jurnal Nasional Pendidikan Teknik Informatika: JANAPATI, 3(1), 10-14.
Illahi, R. (2021). Rancangan bangun kendali untuk peralatan rumah tangga menggunakan smartphone Android berbasis Arduino (Disertasi, Politeknik Negeri Sriwijaya).
Novitasari, D. A., Triyanto, D., & Nirmala, I. (2018). Rancang bangun sistem monitoring pada limbah cair industri berbasis mikrokontroler dengan antarmuka website. Coding Jurnal Komputer dan Aplikasi, 43-52.
Nurcahyo, R., & Setyoko, A. (Tahun). Pengelolaan limbah baterai bekas sebagai limbah B3.
Pamungkas, A. B., & Cahyana, A. S. (2023). Uji viskositas penanganan limbah B3 liquid pada oli bekas menggunakan metode Taguchi. Jurnal Teknik Industri, 9, 144-152. http://dx.doi.org/10.24014/jti.v8i2.21812
Ridarmin, R., Fauzansyah, F., Elisawati, E., & Prasetyo, E. (2019). Prototype robot line follower Arduino Uno menggunakan 4 sensor TCRT5000. Informatika, 11(2), 17-23.
Riyadi, A., & Amri, H. (2022). Rancang bangun sistem monitoring ketinggian limbah oli berbasis Arduino Uno pada PT. Megapower Makmur Tbk Bengkalis. Seminar Nasional dan Industri Teknologi, 31-37.
Rosmanila, R., Radillah, T., & Sofiyan, A. (2018). Prototype lemari pengering pakaian otomatis. Informatika, 10(1), 32-38.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Jurnal Penelitian Rumpun Ilmu Teknik
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
