Analisis Tingkat Kecacatan Produk Dengan Seven Tools Dan Failure Mode Effect Analysis Di PT. Selatan Jadi Jaya
DOI:
https://doi.org/10.55606/juprit.v3i1.3236Keywords:
Defect, Battery, Seven Tools, FMEAAbstract
PT. Selatan Jadi Jaya is a company that produces lead acid batteries for Automotive Car Batteries. During production, problems often arise, namely a fairly high level of product defects. Defects appearing in the burning process include defects in melted tin, burned connectors, bent plates, and torn separators. The purpose of this study is to determine the level of product defects and provide suggestions for improving the quality of battery batteries. Based on the above problems, analyzing the level of defects can use the Seven Tools method and improvement efforts using Failure Mode and Effect Analysis (FMEA). Based on the results of research on Seven Tools that the dominant defect is Connector Burning with a percentage of (33%), then followed by Plate Bent by (26%), then Melted Tin by (24%), and Torn Separator by (17%). Based on the results of the Failure Mode and Effect Analysis research, it is known that the highest RPN value is 200 on tin melt defects. The recommendation for improvement is to adjust the size of the fire according to the procedure.
Downloads
References
Andespa, I. (2020). Analisis Pengendalian Mutu Dengan Menggunakan Statistical Quality Control (SQC) Pada PT. Pratama Abadi Industri (Jx) Sukabumi. E-Jurnal Ekon. dan Bisnis Univ. Udayana, 2, 129.
Aprianto, H. A., Nusyirwan, N., & Prasetya, S. (2019, October). Analisis Kegagalan Gas Cooler pada Sistem Gas Compressor Menggunakan Metode FMEA. In Seminar Nasional Teknik Mesin (Vol. 9, No. 1, pp. 1216-1223).
Hamdani, H., Wahyudin, W., Putra, C. G. G., & Subangkit, B. (2021). Analisis Pengendalian Kualitas Produk 4L45W 21.5 MY Menggunakan Seven Tools dan Kaizen. Go-Integratif: Jurnal Teknik Sistem dan Industri, 2(02), 112-123.
Mungkin, M., & Tanjung, D. A. (2019). Studi Filtrasi Air Belimbing Wuluh Sebagai Elektrolit Baterai Pengganti Elektrolit H2SO4. Jurnal Kimia Saintek Dan Pendidikan, 3(2), 58-63.
Pratama, N. A., Dito, M. Z., Kurniawan, O. O., & Al-Faritsy, A. Z. (2023). Analisis Pengendalian Kualitas Dengan Metode Seven Tools Dan Kaizen Dalam Upaya Mengurangi Tingkat Kecacatan Produk. Jurnal Teknologi dan Manajemen Industri Terapan, 2(2), 53-62
Sihombing, I. G., & Pujotomo, D. (2019). Analisis Penyebab Defect dengan Menggunakan Metode Failure Mode Effects and Analysis dan Fault Tree Analysis pada Assembly Area PT Ebako Nusantara. Industrial Engineering Online Journal, 7(4).
Sunardi, A. T. P., & Suprianto, E. (2020). Pengendalian Kualitas Produk Pada Proses Produksi Rib A320 Di Sheet Metal Forming Shop. Jurnal Industri Elektro dan Penerbangan, 5(2).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal Penelitian Rumpun Ilmu Teknik
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.