Upaya Pengendalian Mutu Produk Menggunakan Metode Statistical Process Control Dan 5W+1H Di PT. Mitra Rekatama Mandiri
DOI:
https://doi.org/10.55606/juprit.v2i3.2341Keywords:
Axis Cap’6, Quality, Statistical Process Control, 5W 1H.Abstract
PT Mitra Rekatama Mandiri is an industrial foundry that makes metal products. The problem that occurs in the company is related to the quality of products that are still experiencing defects with the percentage of defects reaching 5.6% during February-March 2023. The research conducted aims to identify the dominating errors in the fabrication process, determine the factors that cause product defects. The methods applied are Statistical Process Control and 5W + 1H to be able to analyze problems related to product quality control. Based on the results of the study, there were 3 types of defects, namely 52% lossal defects, 30% porous, and 17% lossal defects. The results of the fishbone diagram are known factors that cause defects, namely human factors, methods, materials, machines.
Downloads
References
Ariana, R. (2022). Analisa Statistical Process Control (SPC) Terhadap Kadar Histamin Bahan Baku Tuna Saku Beku (Thunnus albacares) Di PT X. AURELIA JOURNAL, 4(2), 1–10. https://doi.org/http://dx.doi.org/10.15578/aj.v4i2.11384
Aulia, F., Rachman, N., & Al-faritsy, A. Z. (2021). Analisis Pengendalian Kualitas Produk Tutup Botol Tipe Flip Top Menggunakan Seven Tools dan 5W + 1H ( What , When , Who , Where , Why , How ). JURITI PRIMA(Jurnal Ilmiah Teknik Industri Prima), 3(1), 1–9.
Bottani, E., Montanari, R., Volpi, A., Tebaldi, L., & Maria, G. Di. (2021). Statistical Process Control of assembly lines in a manufacturing plant: Process Capability assessment. Procedia Computer Science, 180(2019), 1–10. https://doi.org/10.1016/j.procs.2021.01.353
Hardiyanti, A., Mawadati, A., & Wibowo, A. H. (2021). Analisis Pengendalian Kualitas Proses Penyamakan Kulit Menggunakan Metode Statistical Process Control (SPC). Industrial Engineering Journal of the University of Sarjanawiyata Tamansiswa, 5(1), 1–7. https://doi.org/https://doi.org/10.30738/iejst.v5i1.10436
Hardono, J., Pratama, H., & Friyatna, A. (2019). Analisis Cacat Produk Green Tyre dengan Pendekatan Seven Tools. Jurnal INTECH Teknik Industri Universitas Serang Raya, 5(1), 1–6. https://doi.org/10.30656/intech.v5i1.1462
Nadila, M., Suwardji, E., & Putra, R. A. K. (2021). Analisis Pengendalian Mutu Produk Menggunakan Metode Statistical Process Control (Spc) Pada Pt Outdoor Footwear Networks. Jurnal MANAJERIAL, 20(1), 1–12. https://doi.org/10.17509/manajerial.v20i1.27899
Ngesti, R. S. U., Nur, R. R., & Muhammad, A. N. (2022). Penerapan Metode Statistical Proses Control Dan Failure Mode And Effect Analysis (FMEA) Terhadap Pengendalian Kualitas Produk. Jurnal Ilmiah Cendekia Akuntansi, 7(4), 1–14.
Putra, E. M., Wirawati, S. M., Gautama, P., Studi, P., Industri, T., Teknik, F., & Jaya, U. B. (2020). Analisa Defect Produk Sheet Area Corrugator 301 Menggunakan Metode SPC dan FMEA di PT Indah Kiat. Journal of Applied Industrial Engineering, 12(3), 1–12. https://doi.org/http://dx.doi.org/10.22441/oe.2020.v12.i3.006
Qonita, N., Andesta, D., & Hidayat, H. (2022). Pengendalian Kualitas Menggunakan Metode Statistical Quality Control (SQC) pada Produk Kerupuk Ikan UD Zahra Barokah. Jurnal Optimalisasi, 8(1), 1–9. https://doi.org/10.35308/jopt.v8i1.5285
Somadi, S., Priambodo, B. S., & Okarini, P. R. (2020). Evaluasi Kerusakan Barang dalam Proses Pengiriman dengan Menggunakan Metode Seven Tools. Jurnal INTECH Teknik Industri Universitas Serang Raya, 6(1), 1–11. https://doi.org/10.30656/intech.v6i1.2008
Sylvia, E. W., & Lukmandono. (2022). Perbaikan Kualitas Produk Jeriken Menggunakan Metode SPC dan FMEA di PT. XYZ. Jurnal SENOPATI, 4(1), 1–9.
Umam, R. K., & Kalista, A. (2021). Analisa Pengendalian Kualitas Statistik Dengan Menggunakan Metode Statistical Process Control Di Pt Xyz. MathVision : Jurnal Matematika, 3(1), 1–10. https://doi.org/10.55719/mv.v3i1.258
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Mella Wulandari, Widya Setiafindari
This work is licensed under a Creative Commons Attribution 4.0 International License.
