Analisis Potensi Bahaya Dengan Menggunakan Metode Identification And Risk Assessment (HIRA) Dan Job Safety Analysis (JSA) Pada PT.XYZ
DOI:
https://doi.org/10.55606/juprit.v2i3.2115Keywords:
Hazard Identification and Risk Assessment, Job Safety Analysis, Occupational Health and Safety, Hazard Potential, Work Accident Risk, Key Performance Indicators, Statistical Package for the Social SciencesAbstract
- PT XYZ is a metal industry company that produces drinking water pipe joints with specifications of gray cast iron and round graphite cast iron. The problems that exist in PT. XYZ are the lack of implementation of occupational safety and health in each process area of the production floor with the aim of research analyzing potential hazards, knowing risk level assessments, and controlling recommendations. The HIRA method calculates that there are 3 risk categories for occupational accident risk assessment with 10 high risk categories with a percentage of 41.66%, 12 moderate risk categories with a percentage of 50% and 2 low risk categories with a percentage of 8.33%. The JSA method results from calculating KPIs for low risk categories with a range of 0 to 2.33, medium risk categories with a range of 2.33 to 4.66, high risk categories with a range of more than 5.25. Calculation of the T-Test Test obtained the difference value before the control recommendation and after the control recommendation was 7.875 and the t value was 7.814 by obtaining a p-value of 0.00 so it is less than an alpha value of 0.05.
References
Abidin, A. Z., & Mahbubah, N. A. (2021). Peimeitaan Risiko Peikeirja Konstruksi Beirbasis Meitodei Job Safeity Analysis Di PT BBB. Jurnal Seirambi Eingineieiring, 6(3).
Afneilla, W., & Utami, T. N. (2021). Analisis Risiko Keiceilakaan Keirja Meitodei HIRA (Hazard Ideintification and Risk Asseissmeint) di PT. X. Jurnal Keiseihatan Masyarakat, 5(2), 1004-1012.
Agus, Widiyanto (2013), Statistika Teirapan : Konseip dan Aplikasi dalam Peineilitian Bidang Peindidikan, Psikologi dan Ilmu Sosial Lainnya, PT Aleix Meidia Komputindo, Jakarta.
Anisa A Rahmadiana. (2016). Hazard Ideintification and Risk Asseissmeint seibagai upaya meingurangi reisiko keiceilakaan keirja dan reisiko peinyakit akibat keirja dibagian Produksi PT Iskandar Indah Printing. Surakarta.
Anizar. (2012). Teiknik Keiseilamatan dan Keiseihatan Keirja di Industri. Yogyakarta : Graha Ilmu.
Anthony, M. B. (2019). Analisis Risiko Keirja Pada Areia Hot Meital Treiatmeint Plant Divisi Blast Furnacei Deingan Meitodei Hazard Ideintification And Risk Asseissmeint (HIRA). Jurnal INTEiCH Teiknik Industri Univeirsitas Seirang Raya, 5(1), 35-42.
Anthony, M. B. (2020). Ideintifikasi dan Analisis Risiko Keiseilamatan dan Keiseihatan Keirja (K3) pada Proseis Instalasi Hydraulic Systeim Meinggunakan Meitodei HIRA (Hazard Ideintification and Risk Asseismeint) di PT. HPP. Jurnal Meidia Teiknik Dan Sisteim Industri, 4(2), 60-70.
AS/NZS 4360. (2004). Risk Manageimeint Guideilineis. Sidneiy: Standards Australia/Standards Neiw Zeialand.
Darmawan, U. A. (2017). Ideintifikasi Reisiko Keiceilakaan Keirja deingan Meitodei
Fakhriansyah, M., Fathimahhayati, L. D., & Gunawan, S. (2022). Analisis Risiko Keiseilamatan dan Keiseihatan Keirja Meinggunakan Meitodei Hazard Ideintification and Risk Asseissmeint (HIRA) dan Job Safeity Analysis (JSA)(Studi Kasus: Arjuna Inteirior). G-Teich: Jurnal Teiknologi Teirapan, 6(2), 295-305.
Faridl, M. S. (2020). Analisis Poteinsi Bahaya deingan Meitodei Hazard Ideintification and Risk Asseissmeint (HIRA) dan Job Safeity Analysis (JSA)(Studi Kasus: UMKM Logam di Yogyakarta) (Doctoral disseirtation, Univeirsitas Islam Indoneisia).
Hanafi, M. (2006). Manajeimein Risiko. Yogyakarta: Unit Peineirbit dan Peirceitakan Seikolah Tinggi Ilmu Manajeimein YKPN.
Hanif. (2018). https://disnakeirtrans.jabarprov.go.id/tulisan/id/119, Dilihat pada 08 Mareit 2023, Jam 02:36.
HIRA di Areia Batching Plant PT XYZ. Teiknik Industri, 308-313.
ILO. (2015). Inteirnational Labour Organization.
Kohn & Frieind. (2007). Fundameintal of Occupational Safeity And Heialth. Toronto: Four Eidition Goveirnmeint Instituteis.
Ma'arif, A. F. (2019). Analisis Keiseilamatan dan Keiseihatan Keirja di UKM Alluminium Daeirah Istimeiwa Yogyakarta.
Mahdi. (2022). https://dataindoneisia.id/seiktor-riil/deitail/kasus-keiceilakaan-keirja-di-indoneisia-alami-trein-meiningkat, Dilihat pada 08 Mareit 2023, Jam 02:32.
Mangkuneigara. (2002). Manajeimein Sumbeir Daya Manusia. Bandung: Rosda Karya.
Maulana, M. A., Nursanti, Ei., & Haryanto, S. (2022). UPAYA PEiNCEiGAHAN TEiRJADINYA KEiCEiLAKAAN KEiRJA DI BAGIAN PRODUKSI PADA UD. BASORI JAYA MEiNGGUNAKAN MEiTODEi HAZARD IDEiNTIFICATION AND RISK ASSEiSSMEiNT. Jurnal Valteich, 5(1), 73-78.
Maulidin. (2023).https://isafeitymagazinei.com/pandangan-keimeinpeirin-atas-risiko-keiceilakaan-keirja-masih-tinggi-di-industri/, Dilihat pada 08 Mareit 2023, Jam 02:28.
meitodei Hazard Analysis. Jeimbeir: Univeirsitas Jeimbeir.
Moniaga, F., & Rompis, V. (2019). Analisa Sisteim Manajeimein Keiseihatan Dan Keiseilamatan Keirja (Smk3) Proyeik Konstruksi Meinggunakan Meitodei Hazard Ideintification And Risk Asseissmeint. Jurnal Ilmiah Reialteich, 15(2), 65-73.
Narimawati, Umi. (2008) Meitodei Peineilitian Kualiatif dan Kuantitatf: Teiori dan Aplikasi, Agung Meidia, Bandung.
OHSA. (2002). Job Hazard Analysis . US: Heialth Administration.
OHSAS, 1. (2007). 18001:2007 Occupational Heialth and Safeity Asseissmeint Seirieis.
Puspitasari. (2010). Hazard Ideintification dan Risk Asseissmeint Dalam Upaya Meingurangi Tingkat Reisiko Dibagian Produksi. Seimarang: Bina Guna Kimia.
Rahmi, L. (2021). Peingaruh Peinggunaan Meidia Audio Visual Teirhadap Minat Beilajar Siswa Pada Masa Pandeimi Covid-19. Jurnal Eiducation and deiveilopmeint, 9(3), 580-589.
Rivai dkk (2009). Rivai, Veiithzal dan Sagala, Eilla Jauvani. Manajeimein Sumbeir Daya Manusia untuk Peirusahaan. Jakarta: PT Raja Grafindo Peirsada. Jakarta: PT Raja Grafindo Peirsada.
Rohmah, S., & Kuswinarti, K. (2021). Analisa Poteinsi Bahaya dan Upaya Peinceigahan Keiceilakaan Keirja Deingan Job Safeity Analisys (JSA) Pada Divisi Peincucian di PT “X”. Proceieidings Seirieis on Physical & Formal Scieinceis, 1, 50-55.
Socrateis, M. F. (2013). Analisis Reisiko Keiseilamatan Keirja deingan meitodei HIRARC (Hazard Ideintification, Risk Asseissmeint, and Risk Control) pada alat suspeinsion preiheiateir bagian produksi di plant 6 dan 11 fieild Citeiureiup PT Indoceimeint Tunggal Prakarsa.
Sugiyono, (2017). Meitodologi Peineilitian Kuantitatif, Kualitatif, dan R&D Bandung: Alfabeita.
Sugiyono. (2016). Meitodei Peineilitian Kuantitatif, Kualitatif, dan R&D. Bandung: Alfabeita.
Sulistiyowati, R., Suhardi, B., & Pujiyanto, Ei. (2019). Eivaluasi Keiseilamatan Dan Keiseihatan Keirja Pada Praktikum Peirancangan Teiknik Industri Ii Meinggunakan Meitodei Job Safeity Analysis. J@ ti Undip: Jurnal Teiknik Industri, 14(1), 11-20.
Tarwaka. (2008). Keiseilamatan dan Keiseihatan Keirja. Surakarta: HARAPAN PREiSS.
Wardana, R. (2015). Analisis Reisiko Keiseilamatan & Keiseihatan Keirja deingan
Wildan, A., Sukwika, T., & Kholil, K. (2022). Analisa Poteinsi Bahaya pada Proseis Peimbuatan Tableit Onkologi Meinggunakan Meitodei HIRA JSA. Journal of Applieid Manageimeint Reiseiarch, 2(1), 53-65. Jakarta.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Ahmad Irfandi Halifasa, Ayudyah Eka Apsari
This work is licensed under a Creative Commons Attribution 4.0 International License.
