Rancang Bangun Alat Pembakaran Minim Asap Pada Tungku Arang Dengan Sistem Konsentrasi Asap
DOI:
https://doi.org/10.55606/juprit.v2i2.1582Keywords:
Coconut Shell, Tube Pipe, Mechanical Tools Design, Polytechnic of TanjungbalaiAbstract
This design aims to design a smoke-less combustion device in a charcoal stove with a smoke concentration system which is expected to minimize the smoke generated from burning coconut shell charcoal. The design implementation was carried out in the workshop of the Mechanical Engineering Study Program, Maintenance and Repair of the Tanjungbalai Polytechnic. This tool has two tubes, the inner tube is in the form of a cylinder, the overall height is 930 mm, and the diameter is 480 mm with a reactor tube capacity of 17 liters, the coconut shell is 25 kg. The outer tube is cylindrical in shape, has a height of 1200 mm and a diameter of 560 mm. This heat conducting pipe is made of stainless which is inside the 2nd tube or inner tube, this pipe has a height of 380 mm and a width of 60 mm in diameter. This pipe also has 12 holes and 1 hole at the top.
References
Amponsah, S. K., Asare, H., Okyere, H., Owusu-Asante, J. O., Minkah, E., & Ketemepi, H. K. (2022). Performance Characterization of a Locally Developed Fish Smoke-Drying Kiln for Charcoal and Briquette. Journal of Agricultural Science, 14(11), 43. https://doi.org/10.5539/jas.v14n11p43
Bantu, A. A., Nuwagaba, G., Kizza, S., & Turinayo, Y. K. (2018). Design of an Improved Cooking Stove Using High Density Heated Rocks and Heat Retaining Techniques. Journal of Renewable Energy, 2018, 9620103. https://doi.org/10.1155/2018/9620103
Bello, S. R., Onilude, M. A., & Adegbulugbe, T. A. (2015). Design and Performance Evaluation of Supplemental Air Supplied Charcoal Stove. International Letters of Chemistry, Physics and Astronomy, 54(July), 1–10. https://doi.org/10.18052/www.scipress.com/ilcpa.54.1
Dare, F., Christopher, O., & Okusanya, M. (2021). Impact of Improved Smoking Kiln Design on Hygiene and Timeliness of Drying of Smoked Fish. Turkish Journal of Agricultural Engineering Research, 02(01), 133–155. https://doi.org/10.46592/turkager
El-batrawy, O. A. (2019). Air Quality around Charcoal Making Kilns and the Potential Health Hazards. International Journal of Environment, 180–188. https://doi.org/10.36632/ije/2019.8.4.4
Fathussalam, M., Putranto, A., Argo, B., Harianti, A., Oktaviani, A., Puspaningarum, F., & Putri, S. (2019). Rancang Bangun Mesin Produksi Asap Cair Dari Tempurung Kelapa Berbasis Teknologi Cyclone-Redistillation. Jurnal Ilmiah Rekayasa Pertanian Dan Biosistem, 7, 148–156. https://doi.org/10.29303/jrpb.v7i2.113
Hartoyo, N. H. (1990). Pembuatan Arang Rendemen Tinggi Dari Tempurung Kelapa Dengan Kiln Drum. Jurnal Penelitian Hasil Hutan, Vol 7, No 4 (1990): Jurnal Penelitian Hasil Hutan, 134–138. https://doi.org/https://doi.org/10.20886/jphh.1990.7.4.134%20-%20138
Intara, Y. I., Budiyanto, Caniago, Z., & Aldo, R. (2021). Development of Type Drum Kiln to Make Charcoal and Wood Vinegar for The Utilization of Coconut Shell Waste. Proceedings of the International Seminar on Promoting Local Resources for Sustainable Agriculture and Development (ISPLRSAD 2020), 13(Isplrsad 2020), 413–419. https://doi.org/10.2991/absr.k.210609.064
Januar, J. (2022). Design of a Light Intensity Regulator with Remote Control for Incandescent Lamps. Jurnal Matematika Dan Ilmu Pengetahuan Alam LLDikti Wilayah 1 (JUMPA), 2(2), 94–101. https://doi.org/10.54076/jumpa.v2i2.228
Jayanti, T. A. D., Sudarmanto, A., & Faqih, M. I. (2020). Cold Smoking Equipment Design of Smoked Fish Products with Closed Circulation Using Temperature and Concentration Monitoring System Based on Arduino Uno. IOP Conference Series: Materials Science and Engineering, 846(1). https://doi.org/10.1088/1757-899X/846/1/012025
Khusaini, F., Ridwan, R., Ridhuan, K., & Irawan, D. (2021). Pengaruh jumlah pipa udara pada reaktor pembakaran pirolisis terhadap hasil arang dan asap cair. ARMATUR : Artikel Teknik Mesin & Manufaktur, 2, 106–114. https://doi.org/10.24127/armatur.v2i2.1450
Lubwama, M., Yiga, V. A., Ssempijja, I., & Lubwama, H. N. (2021). Thermal and mechanical characteristics of local firewood species and resulting charcoal produced by slow pyrolysis. Biomass Conversion and Biorefinery, 0123456789. https://doi.org/10.1007/s13399-021-01840-z
Mohd Mokhtar, N., Bappu, M., Fazli, W., Wilson, L., Thorairajoo, J., Yunus, N., Ramli, R., & Hadi, M. (2022). Design, Fabrication and Performance Evaluation of Charcoal Barbecue with Air Ventilation System. Journal of Agricultural Science, 14(11), 237–247. https://doi.org/10.1007/978-981-19-2890-1_24
Mopoung, S., & Udeye, V. (2017). Characterization and Evaluation of Charcoal Briquettes Using Banana Peel and Banana Bunch Waste for Household Heating. American Journal of Engineering and Applied Sciences, 10(2), 353–365. https://doi.org/10.3844/ajeassp.2017.353.365
Odesola, I. F., Ige, E. O., & Yunus, I. O. (2019). Design and Performance Evaluation of Energy Efficient Biomass Gasifier Cook Stove Using Multi Fuels. Journal of Energy Research and Reviews, October, 1–7. https://doi.org/10.9734/jenrr/2019/v3i430103
Putra, N. E., Aris, Y., & Novi Munti, S. (2022). Rancang Bangun Kompor Biomassa sebagai Kompor Ramah Lingkungan. JUTIN : Jurnal Teknik Industri Terintegrasi, 5(1), 55–67. https://doi.org/10.31004/jutin.v5i1.9789
Rahmat, B., & Suharjadinata, R. (2022). Design Of Coconut Fruit-Coat Charcoal Briquette-Presser And Its Product Characterization. International Journal of Scientific & Technology Research, 11, 45–48.
Ridwan, A. (2012). Rancang Bangun Tungku Biomassa Hemat Energi Dan Ramah Lingkungan Pada Tungku Tradisional Masyarakat Berbahan Bakar Kayu. Photon: Jurnal Sain Dan Kesehatan, 3(1), 69–78. https://doi.org/10.37859/jp.v3i1.151
Soolany, C., & Fadly, F. (2020). Rancang Bangun Dan Uji Kinerja Tungku Drum Kiln Pada Proses Produksi Arang Kulit Durian Sebagai Alternatif Bahan Bakar. AME (Aplikasi Mekanika Dan Energi): Jurnal Ilmiah Teknik Mesin, 6, 34. https://doi.org/10.32832/ame.v6i2.3259
Suherman, S., Anwar, M. K., Hariyanto, A., Harahap, M., Syahputra, S. A., & Sai’in, A. (2022). Pengaruh Jenis Adonan terhadap Jumlah Cacat Produksi Pakan Ikan Bentuk Pellet Kapasitas Produksi 26 kg/jam. Jurnal Rekayasa Mesin, 17(3), 369–380. https://doi.org/http://dx.doi.org/10.32497/jrm.v17i3.3294
Tahir, M., Salengke, S., Mrsalim, Metusalach, & Caesarendra, W. (2020). Performance of smokehouse designed for smoking fish with the indirect method. Processes, 8(2). https://doi.org/10.3390/pr8020204
Ycaza, S. R., & Barre, J. T. (2018). Charcoal briquettes from dried mango leaves (DML) - an alternative solid fuel source. Ciencia, 37, 13–24.
Yusuf, M., Witdarko, Y., Pamungkas, W., Parjono, P., & Suryadi, S. (2023). Characteristics of Charcoal Briquettes from Rice Husk Waste with Compaction Pressure Variations as an Alternative Fuel. Journal of Ecological Engineering, 24(4), 237–243. https://doi.org/10.12911/22998993/159966
