Analisis Penerapan Integrated Tug Barge Sebagai Angkutan Batu Bara Di PT. Bara Jaya Bersama

Authors

  • Catur Daminto Universitas Maritim AMNI Semarang
  • Purwanto Universitas Maritim AMNI Semarang

DOI:

https://doi.org/10.55606/juprit.v2i2.1461

Keywords:

Integrated tug barge, cost, speed/cycle, transport capacity, barge.

Abstract

Coal mining activities cannot be separated from the distribution of mining products. The distribution of coal in Kalimantan is currently still dominated by sea routes. Transportation of coal by sea using ships can maximize transportation because the amount transported is more and is considered to be cheaper and more effective. Integrated Tug Barge (ITB) is a barge propelled by specially configured tugboats. When the tug and barge are connected, they form a unit that functions as a ship. Integrated Tug Barge (ITB) can be an alternative choice compared to conventional ships of the same size. There are various variables that can affect the effectiveness of using ITB as an alternative to coal loading. In this study, three research variables will be analyzed, namely costs, transportation capacity and speed/cycle as independent variables and the potential for implementing ITB as the dependent variable.

The purpose of this study was to analyze whether the positive influence individually between the independent variables cost, transport capacity and speed/cycle on the dependent variable, namely the potential for implementing ITB. In this study, the object taken was the employee of PT Bra Jaya Bersama.

References

Aliffrananda, M. Hafiz Nurwahyu, Wasis Dwi Aryawan, dan Wasis Dwi Aryawan. 2019. “Desain Barge Sebagai Alternatif Pengganti Jetty Untuk Sarana Bongkar Muat Kapal Tanker.” Jurnal Teknik ITS 8 (1). https://doi.org/10.12962/j23373539.v8i1.42075.

Amri, Muhammad Charis Ali. 2015. “Analisa Penerapan Integrated Tug Barge Dan Self Propeller Coal Barge Untuk Angkutan Batubara Di Perairan Laut Jawa (Studi Kasus : Kalimantan Selatan – Jawa Timur),” 108. http://repository.its.ac.id/51861/.

Fabiola Luturmas, Wahyu Setyawan, Jurusan Kemaritiman, Politeknik Negeri, Mahasiswa Jurusan Kemaritiman, dan Latar Belakang. 2020. “Prosedur Pembongkaran Batu Bara” 10 (2): 59–67. Maritim, Jurnal,

Khafendy, Khafendy, dan Johny Malisan. 2020. “Kebutuhan Desain Kapal Untuk Tongkang Batu Bara Secara Statistik.” Jurnal Penelitian Transportasi Laut 16 (1): 18–24. https://doi.org/10.25104/transla.v16i1.1430.

Kurniawan, Iksan Ade, dan Setyo Nugroho. 2012. “Analisis Potensi Penggunaan Integrated Tug Barge untuk Short Sea Shipping Studi Kasus : Pantura.” Jurnal Teknik ITS 1 (September): 25–28.

Pradono, P., Ibnu Syabri, Y. R. Shanty, dan M. Fathoni. 2019. “Comparative analysis on integrated coal transport models in South Sumatra.” Journal of Environmental Treatment Techniques 7 (4): 696–704.

Papalangi, Ferlyn, Imam Pujo Mulyatno, Parlindungan Manik, Fakultas Teknik, dan Universitas Diponegoro. 2015. “Studi Perancangan Tongkang Pengangkut Limbah Batubara Di Pltu Tanjung Jati B Jepara.” Jurnal Teknik Perkapalan 3 (2): 222–29.

Pemerintah Indonesia. Undang-Undang Nomor 4 Tahun 2009 tentang Pertambangan Mineral dan Batubara, Sekretariat Negara. Jakarta.

Sjafril Karana, Sjafril. 2016. “Kajian Penentuan Jenis Dan Ukuran Sarana Angkutan Batubara Dari Pelabuhan Sorong Ke Pltu Kti = Study for Type and Tonnage of Sea Transportation Means of Port on Coal Power Plant Sorong To Pltu Kti.” Majalah Ilmiah Pengkajian Industri 9 (2): 93–99. https://doi.org/10.29122/mipi.v9i2.89.

Sugiyono.2016. Statistika untuk Penelitian. Penerbit Alfabeta. Bandung

Downloads

Published

2023-03-30

How to Cite

Catur Daminto, & Purwanto. (2023). Analisis Penerapan Integrated Tug Barge Sebagai Angkutan Batu Bara Di PT. Bara Jaya Bersama. Jurnal Penelitian Rumpun Ilmu Teknik, 2(2), 21–34. https://doi.org/10.55606/juprit.v2i2.1461