Analisis Potensi Bahaya K3 Menggunakan Metode HIRARC Pada Bagian Boiler PLTU Nii Tanasa Kendari Di Kecamatan Lalonggasumeeto Kabupaten Konawe Tahun 2023

Authors

  • Adinda Gadis Wiradara Universitas Halu Oleo
  • Fifi Nirmala G. Universitas Halu Oleo Kendari
  • Syawal kamiluddin Saptaputra Universitas Halu Oleo Kendari

DOI:

https://doi.org/10.55606/detector.v2i1.3352

Keywords:

HIRARC, Potential Hazard, Boiler, PLTU

Abstract

HIRARC is a document that contains hazard identification, risk assessment and risk control in order to reduce the occurrence of occupational safety and health disturbances. The type of research used is qualitative with a descriptive approach. The research aims to explain the value of the risks contained in each work area by describing the work safety analysis process by determining the level of likelihood and severity of each risk. Based on interviews and observations conducted by researchers in the Boiler section of PLTU Nii Tanasa Kendari, there are several potential dangers ranging from physical, mechanical, chemical, electrical, to ergonomic dangers. The results of the analysis of potential hazards show a low risk of 9 types of danger, a moderate risk of 7 types of danger, a high risk of 8 types of danger.The controls used are technical engineering such as providing fire extinguishers and first aid kits, installing handrails and guardrails to anticipate falls from heights, and providing insulation and dampening for equipment that is at high risk of causing work accidents. Administrative controls such as providing work instructions and SOPs, cleaning work environment areas and using PPE.

References

Ariyani, R., Suarantalla, R., & Mashabai, I. (2021). Analisa Potensi Kecelakaan Kerja Pada Pt. Pln (Persero) Sumbawa Menggunakan Metode Hazard and Operability Study (Hazop). Jurnal Industri & Teknologi Samawa, 2(1), 11–21. https://doi.org/10.36761/jitsa.v2i1.1019

Arnold, J. K. T., Doda, D. V. D., & Akili, R. H. (2020). Analisis Risiko Kecelakaan Kerja Pada Pemeliharaan Alat Container Crane dan Rubber Tyred Gantries. Jurnal E-Biomedik, 8(2), 163–172. https://doi.org/10.35790/ebm.v8i2.29553

Herli, I., Nurhidayah, T., & Siregar, Y. I. (2018). Analisis Intensitas Kebisingan Terhadap Pendengaran Pekerja Pabrik Kelapa Sawit PT. Ganda Buanindo Kabupaten Kampar. Dinamika Lingkungan Indonesia, 5(1), 48. https://doi.org/10.31258/dli.5.1.p.48-56

Imanda, I. (2020). Penilaian Dan Pengendalian Resiko Hazard Fisik. OSF Preprints, 1(1), 1–7. https://osf.io/mejza/

Mardlotillah, N. I. (2020). Manajemen Risiko Keselamatan dan Kesehatan Kerja Area Confined Space. Higeia Journal Of Public Health Research And Development, 4(Special 1), 315–327. http://journal.unnes.ac.id/sju/index.php/higeia

Mayadilanuari, A. M. (2020). Penggunaan HIRARC dalam Identifikasi Bahaya dan Penilaian Risiko pada Pekerjaan Bongkar Muat. Higeia Journal of Public Health Research and Development, 4(2), 245–255. http://journal.unnes.ac.id/sju/index.php/higeiahttps://doi.org/10.15294/higeia/v4i2/30908

Monoarfa, V., & Miolo, R. N. B. (2022). Penerapan Keselamatan dan Kesehatan Kerja ( K3 ) Menggunakan Metode HIRARC Pada UMKM Pabrik Tahu. Jurnal Pengabdian Ekonomi, 02(01), 1–6.

Nofianti, D. W., & Koesyanto, H. (2019). Masa Kerja, Beban Kerja, Konsumsi Air Minum dan Status Kesehatan dengan Regangan Panas pada Pekerja Area Kerja. Journal of Public Health Research and Development, 3(4), 524–533. http://journal.unnes.ac.id/sju/index.php/higeiahttps://doi.org/10.15294/higeia/v3i4/28158

Oktarizal, H., Irawati, I., & Rosidah, I. (2020). Kecelakaan Kerja Dalam Penerapan Work Permit. Jounal of STIKes Awal Bros Pekanbaru, 1(1), 54–63. https://ojs.stikesawalbrospekanbaru.ac.id/index.php/jsabp/article/view/16

Putri, D. N., & Lestari, F. (2023). Analisis Penyebab Kecelakaan Kerja Pada Pekerja di Proyek Konstruksi : Literatur Review. Jurnal Kesehatan Masyarakat, 7(1), 444–460.

Sari, S., & Nouryend, N. (2022). Identifikasi potensi bahaya dan pengendaliannya dengan hazard identification risk assessment and risk control. Journal Industrial Servicess, 7(2), 217. https://doi.org/10.36055/jiss.v7i2.12265

Sofyan, H., & Maulana, M. F. (2022). Analisis Bahaya Dan Risiko K3 Dengan Metode Hirarc Pada Area Dieshop Di Pt Xyz Plant 2. Sistemik : Jurnal Ilmiah Nasional Bidang Ilmu Teknik, 10(1), 21–26. https://doi.org/10.53580/sistemik.v10i1.66

Sugiharto, D. &. (2017). Kebisingan Dan Gangguan Psikologis Pekerja Weaving Loom Dan Inspection Pt. Primatexco Indonesia. JHE (Journal of Health Education), 2(2), 130–137.

Supriyadi, & Ramdan, F. (2017). Identifikasi Bahaya Dan Penilaian Risiko Pada Divisi Boiler Menggunakan Metode Hazard Identification Risk Assessment and Risk Control (Hirarc). Journal of Industrial Hygiene and Occupational Health, 1(2). https://doi.org/10.21111/jihoh.v1i1.752

Urrohmah, D. S., & Riandadari, D. (2019). Identifikasi Bahaya dengan Metode HIRARC dalam Upaya Memperkecil Risiko Kecelakaan Kerja di PT . PAL Indonesia. Jurnal Teknik Mesin UNESA, 08(01), 34–40. https://ejournal.unesa.ac.id/index.php/jurnal-pendidikan-teknik-mesin/article/view/27090

Utami, A. P. (2017). Identifikasi Bahaya, Penilaian Risiko Kesehatan dan Keselamatan Kerja (K3) pada Unit Kiln dan Coal Mill Tonasa IV PT. Semen Tonasa Pangkep Tahun 2017 Skripsi. Universitas Islam Negeri Alauddin Makassar.

Utami, F. I., & Sugiharto. (2020). Identifikasi Bahaya Fisik, Mekanik, Kimia dan Risiko. Higeia Journal of Public Health Research and Development, 4(1), 67–76.

Wahyuni. (2019). Hubungan Pajanan Debu Dengan Kapasitas Paru Pada Pekerja di Area Boiler PT. Makassar Tene. Jkmm, 2(1), 18–24.

Wahyuni, A., Entianopa, & Kurniawati, E. (2020). Hubungan Iklim Kerja Panas Terhadap Dehidrasi Pada Pekerja Di Bagian Dryler Di Pt.X Tahun 2020. Indonesian Journal of Health Community, 1(1), 28–34.

Wahyuningsih, U., Sulistyo, E., Rusjdi, H., Alfalah, W., Sudirmanto, S., & Prabowo, E. (2021). Pengenalan Keselamatan Dan Kesehatan Kerja Di PT Cita Rasa Palembang. Terang, 3(2), 155–162. https://doi.org/10.33322/terang.v3i2.431

Zeinda, E. M., & Hidayat, S. (2017). Risk Assessment Kecelakaan Kerja Pada Pengoperasian Boiler Di Pt. Indonesia Power Unit Pembangkitan Semarang. The Indonesian Journal of Occupational Safety and Health, 5(2), 183. https://doi.org/10.20473/ijosh.v5i2.2016.183-191

Downloads

Published

2024-01-08

How to Cite

Wiradara, A. G., G., F. N., & Saptaputra, S. kamiluddin. (2024). Analisis Potensi Bahaya K3 Menggunakan Metode HIRARC Pada Bagian Boiler PLTU Nii Tanasa Kendari Di Kecamatan Lalonggasumeeto Kabupaten Konawe Tahun 2023. Detector: Jurnal Inovasi Riset Ilmu Kesehatan, 2(1), 243–262. https://doi.org/10.55606/detector.v2i1.3352