Rancang Bangun Sistem Pengendali Roda Kursi Otomatis dengan Sensor Flex Arduino Berbasis Mikrokontroler

Authors

  • Rieza Anara Universitas Panca Budi Medan

DOI:

https://doi.org/10.55606/juprit.v2i1.1255

Keywords:

Disabilities, Flex Sensor, Wheelchair, Microcontroller, Bluetooth

Abstract

A wheelchair is one of the equipment used by persons with physical disabilities in carrying out activities. Currently, there are still many wheelchairs that use human power to move them, so a wheelchair robot was made with motion control using flex sensor technology. This system uses two controllers as one master controller and one slave controller. Wheelchairs are often used by hospital patients as well as people with physical disabilities, most of whom still use manual systems. This device uses Bluetooth as a communication medium between two controllers. The Flex sensor is mounted in the user's hand as the master, and the controller in the wheelchair is a slave. So the researchers designed an automatic wheelchair simulator using flex sensor technology that helps facilitate wheelchair user activity by using curvature of the fingers. To move the walking wheelchair, use the command with the position of the fingers do the flexion and the position of the other fingers also do the flexion. In testing the wheelchair robot system, obtained the success rate of wheelchair movement with flex sensor commands of 83.3%.

References

Departemen Pendidikan Nasional. (2005). Pedoman Pengertian Simulator. Jakarta: Depdiknas

Infodatin. (2014). Penyandang Disabilitas Pada Anak. Jakarta: Pusat Data dan Informasi Kementrian Kesehatan RI.

Michael, D., Gustina. (2019). Rancang Bangun Prototype Monitoring Kapasitas Air Pada Kolam Ikan Secara Otomatis Dengan Menggunakan Mikrokontroller Arduino

Nugroho, A., (2009). Rekayasa Perangkat lunak menggunakan umi dan jaya, Andi,. Andi.

Prasetyo, T. F., Muhaemin, M. (2019). Pengembangan Prototipe E-Health Pasien Terintegrasi Dengan Arduino Uno R3

Rio Asruleovito, Isnan Nur Rifai. (2014). KURSI RODA DENGAN PENGENDALI BLUETOOTH SMARTPHONE ANDROID BERBASIS ARDUINO UNO

Sujadi, H., Paisal, P. (2018). SISTEM KEAMANAN SEPEDA MOTOR MENGGUNAKAN Mikrokontroller Arduino Uno R3 Dengan Sensor Hc-Sr501 Dan Hc-Sr04

Susandi, D., Nugraha, W., Rodiyansyah, S. F. (2017). Perancangan Smart Parking System Pada Prototype Smart Office Berbasis Internet Of Things

Susandi, D., Nugraha., W. (2019). Rancang Bangun Aplikasi Android Security Status Sebagai Pengendali Prototype Sistem Keamanan Berbasis Arduino Uno R3

Yudhi Gunardi. (2015). Rancang Bangun Robot Pengendali Kursi Roda Menggunakan Suara.

Downloads

Published

2023-02-17

How to Cite

Rieza Anara. (2023). Rancang Bangun Sistem Pengendali Roda Kursi Otomatis dengan Sensor Flex Arduino Berbasis Mikrokontroler. Jurnal Penelitian Rumpun Ilmu Teknik, 2(1), 158–166. https://doi.org/10.55606/juprit.v2i1.1255